Warranty; Lost Codes - GE RM24927 Instruction Manual

Trouble Shooting
PROBLEM
SELECT button not
responding
Flashing Indicator
Light
NOTE: Reprogramming may be required
after batteries are removed.
90 Day Limited Warranty
Jasco Products Company warrants this
product to be free from manufacturing
defects for a period of ninety days from the
original date of consumer purchase. This
warranty is limited to the repair or replace-
ment of this product only and does not
extend to consequential or incidental dam-
age to other products that may be used with
this unit. This warranty is in lieu of all
other warranties express or implied. Some
states do not allow limitations on how long
an implied warranty lasts or permit the
exclusion or limitation of incidental or con-
sequential damages, so the above limita-
tions may not apply to you. This warranty
gives you specific rights, and you may also
have other rights which vary from state to
state. If unit should prove defective within
the warranty period, return prepaid with
dated proof of purchase to:
Jasco Products Company
311 N.W. 122nd
Oklahoma City, OK 73114
LOST YOUR CODES?
Enclosed with this remote is a sticker on
which you should write the codes for each
device you programmed. Apply the sticker
to the back of the remote or somewhere con-
venient for future reference.
Also on the sticker is our website address
which, should you lose your codes or pro-
gramming instructions, you can find avail-
able on our website:
www.jascoproducts.com
SOLUTION
Try using the DIS-
PLAY button to make
the selection while in
the Program Guide.
Invalid Code for the
device. Check the
Code list and repro-
gram the Remote
Control.
18