Player Status Indicators - Sonos PLAY:5 Product Manual

SONOS PLAY:5
I want to change my wireless network password
If your Sonos system is set up wirelessly and you change your wireless network password, you will also need to change it on
your Sonos system.
Temporarily connect one of your Sonos players to your router with an Ethernet cable.
1.
Choose one of the following options:
2.
• Using a handheld Sonos controller, select Settings -> Advanced Settings -> Wireless Setup.
• Using the Sonos Controller App for PC, select Settings -> Advanced from the Manage menu. On the General tab, select
Wireless Setup.
• Using the Sonos Controller App for Mac, select Preferences -> Advanced from the Sonos menu. On the General tab,
select Wireless Setup.
Enter the new wireless network password when prompted.
3.
Once the password is accepted, you can unplug the player from your router and move it back to its original location.
4.

Player Status Indicators

Important Note: Do not place any items on top of your Sonos player. This may impede the
air flow and cause it to overheat.
Indicator Lights
Solid white Powered up and associated with a
Sonos system
Flashing white Powering up
Flashing green Powered up, not yet associated with
a Sonos system
Solid green Volume set to zero or muted
Player State
BRIDGE, BOOST,
CONNECT, SUB,
CONNECT:AMP, DOCK,
PLAY:1, PLAY:3, PLAY:5,
PLAYBAR
BRIDGE, BOOST,
CONNECT, SUB,
CONNECT:AMP, DOCK,
PLAY:1, PLAY:3, PLAY:5,
PLAYBAR
BRIDGE, BOOST,
CONNECT, SUB,
CONNECT:AMP, DOCK,
PLAY:1, PLAY:3, PLAY:5,
PLAYBAR
CONNECT,
CONNECT:AMP, PLAY:1,
PLAY:3, PLAY:5,
PLAYBAR
Sonos Product
If desired, when the product is in normal operation,
you can turn the white status indicator light on or off
by selecting White Status Light from the Room
Settings menu.
(The SUB indicator will reflect the same setting as
the player it is paired with.)
For a SUB, this may indicate the SUB is not yet paired
with a player.
Additional Information
15