Intelligent Sweep Panorama - Sony Cyber-shot DSC-TX7 Instruction Manual

Intelligent Sweep Panorama

Allows you to create a panoramic image from composed images. The camera also automatically
detects people's faces or moving subjects.
1 Lower the lens cover to switch to shooting mode.
(REC Mode) t
2
3 Align the camera with the end of the subject to be
shot and press the shutter button fully down.
4 Pan the camera to the end of the guide,
following the indication on the LCD
screen.
Notes
• If you cannot pan the camera across the entire subject within the given time, a gray area occurs in the
composed image. If this happens, move the camera faster to record a full panoramic image.
• Since several images are stitched together, the stitched part will not be recorded smoothly.
• Under low light conditions, panoramic images may be blurred.
• Under lights that flicker such as fluorescent light, the brightness or color of the combined image is not
always the same.
• When the whole angle of panoramic shooting and the AE/AF locked angle are very different in
brightness, color and focus, the shooting will not be successful. If this happens, change AE/AF locked
angle and shoot again.
• Intelligent Sweep Panorama is not suitable for the following situations:
– Objects are too close to the camera
– Image with little contrast such as sky, sandy beach, or lawn
– Image with constant change such as waves or waterfalls
• You cannot create panoramic images in the following situations:
– You pan the camera too fast or too slow
– There is too much camera shake
(iSweep Panorama)
Guidance
bar
This part will not be taken
Continued r
28 GB