Alpine PWE-V80 Instruction Manual

SPECIFICATION
MAX POWER OUTPUT............................................... 160W
CROSSOVER .............................................................. 30-160Hz (-12dB/oct)
PHASE ......................................................................... 0°,180°
INPUT SENSITIVITY
OPERATIONAL VOLTAGE .......................................... DC 14.4V (Operational between: 11~16V)
DIMENSIONS .............................................................. 342mmX238mmX80mm
WEIGHT....................................................................... 5 Kg
SUBWOOFER INSTALLATION
Subwoofer Installation Place
Under the seat
Under the seat In the trunk
Caution: Subwoofer warms up during continuous usage. Please make sure
that it is not covered and the installation place provides free space to the unit.
Installation place and method must not damage electrical wirings, gasoline
tank and other objects which might cause short circuit, fire, etc.
ACCESSORIES
Line controller
10P connection couple
(Power line, remote start wire,
speaker input wire, ground wire)
5M power extension coupler (12AWG)
Speaker output wire
80mV-0.5V (Line Input)
0.9V-6V (Speaker Input)
1. Mount the installation bracket onto the bottom of the subwoofer (4 brackets, 4 screws).
2. Fix the brackets on the body of the vehicle (4 brackets, 4 screws).
Subwoofer PWE-V80
Brackets and screws
Remote start wire
Mounting bracket
Fixed screw (locking vehicle)
Fixed screw (locking body)
8 INCH SUPER COMPACT ACTIVE SUBWOOFER
PWE-V80
Instruction Manual