Hitachi 50VG825 Operating Manual page 48

TV Guide On Screen
Screen 4:
Do you have a Cable box connected?
Use the CURSOR PAD
choice, then press the SELECT button to continue.
If YES: Please see Screen 5.
If NO: Please see Screen 12.
Screen 5:
Which TV input is the Cable box plugged into?
AIR/CABLE: Please see Screen 6.
INPUT 1/2: Please see Screen 7.
Screen 6:
Select the channel your TV is tuned to when using
a Cable box. Use the CURSOR PAD
highlight your choice, then press the SELECT
button to continue.
48
Screen 7:
and to highlight your
Screen 8:
Screen 9:
and to
http://www.pureglare.com.au
This screen shows the correct way to setup the
Cable box with the G-LINK. Please confirm
connection (see Page 20). Press the SELECT
button to continue.
Use the CURSOR PAD and
Cable box brand or choose "Not Listed" if not
listed, then press the SELECT button to continue.
To allow the TV Guide On-Screen system to find
the correct code for your brand of Cable box, tune
the Cable box to channel 2. Please make sure that
the Cable box and TV are ON. Press the SELECT
button to continue.
to highlight your