Monessen Hearth IRVF2T Installation, Operation And Maintanance Manual page 10

G P
AS IPING AND
F 2
IGURE
UNION
SHUTOFF
VALVE
JOIST
SEDIMENT
TRAP
8
53D9012. Rev 1 03/03
G P
AS RESSURE
CONTROL KNOB
IGNITOR BUTTON
(FLOOR STAND SOLD AS AN ACCESSORY.) (FLOOR STAND SOLD AS AN ACCESSORY.)
FLOOR
GAS SUPPLY
NOTE:
LINE
A PLUGGED 1/8" NPT TAP MUST BE
LOCATED SOMEWHERE BETWEEN THE
TEE
SHUTOFF VALVE AND THE HEATER'S
3/8" NPT INLET FITTING.
IGNITOR BUTTON IGNITOR BUTTON
F 3
IGURE
MAIN REGULATOR MAIN REGULATOR
REGULATOR BRACKET REGULATOR BRACKET
UNION UNION
SHUTOFF VALVE SHUTOFF VALVE
GAS SUPPLY LINE GAS SUPPLY LINE
NOTE: NOTE:
A PLUGGED 1/8" NPT TAP MUST BE LOCATED SOMEWHERE BETWEEN THE A PLUGGED 1/8" NPT TAP MUST BE LOCATED SOMEWHERE BETWEEN THE
R
EQUIREMENTS
FLOOR STAND REQUIRED IF FLOOR STAND REQUIRED IF
HEATER IS TO BE INSTALLED HEATER IS TO BE INSTALLED
AS A FREESTANDING HEATER. AS A FREESTANDING HEATER.
FLOOR PROTECTION REQUIRED FLOOR PROTECTION REQUIRED
FOR ANY COMBUSTIBLE FLOOR FOR ANY COMBUSTIBLE FLOOR
MATERIAL OTHER THAN WOOD. MATERIAL OTHER THAN WOOD.
3/8" NPT INLET FITTING FOR GAS 3/8" NPT INLET FITTING FOR GAS
SUPPLY IN BOTTOM OF HEATER. SUPPLY IN BOTTOM OF HEATER.
TEE TEE
SEDIMENT TRAP SEDIMENT TRAP
SHUTOFF VALVE AND THE HEATER'S 3/8" NPT INLET FITTING. SHUTOFF VALVE AND THE HEATER'S 3/8" NPT INLET FITTING.
CONTROL KNOB CONTROL KNOB
FLOOR FLOOR
3/8" NPT INLET FITTING FOR GAS 3/8" NPT INLET FITTING FOR GAS
SUPPLY IN BOTTOM OF HEATER. SUPPLY IN BOTTOM OF HEATER.
JOIST JOIST