Vibration Mode - Samsung T199 User Manual

To answer a call while you have a call in progress:
1. While on a call, press
(Accept) to answer a new incoming call.
The previous caller is automatically put on
hold when you answer the new incoming
call.
2. To switch between the two calls, press
(Options) Swap. Swap places the
current call on hold and then activates the
previous call.
To end a call on hold:
While on a call, press
Held call.
3-Way Calling (Multi-Party Calling)
Use the 3-Way, or Multi-Party, feature to answer
a series of incoming calls and place them on
hold.
If this service is supported by the network, and if
the SIM has the feature enabled, all calls can be
joined together. You are notified of an incoming
call by a call waiting tone.
1. Make a call by either dialing a new number
and pressing
call and press
or press
(Options) End
or receiving an incoming
(Accept).
2. Make a new call by pressing
New call, enter the new number, and
press (Call). Wait for the new caller to
answer. The first call is automatically put
on hold.
3. Press (Options)
of your callers, the active call and the call
on hold, in a single multi-party call.
4. Press to end the 3-way call.

Vibration Mode

Vibration mode is convenient when you want to
stop the phone from making a sound, but want
to be notified of incoming calls and messages.
In Vibration mode, your phone speakers are
muted. An incoming call causes the phone to
vibrate and light up.
In Idle mode, press and hold
phone vibrates. The "Vibration Profile On"
message appears on the screen. The
Vibration mode icon
screen. For more information, refer to
"Sound Profiles" on page 45.
To exit Vibration Mode:
From the Idle screen, press and hold
again until the previous Sound Profile is
restored.
(Options)
Join to join with both
until the
is displayed on the
Call Functions 21