Hardware Setup
Hardware Setup
Serial ATA Connector: SATA1~6
This connector is a high-speed Serial ATA interface port. Each connector can connect
to one Serial ATA device.
Important
•
Please do not fold the Serial ATA cable into 90-degree angle. Otherwise, data loss
may occur during transmission.
Front Panel Connector: JFP1, JFP2
This connector is for electrical connection to the front panel switches and LEDs. The
JFP1 is compliant with Intel
JFP1
2-12
* The MB layout in this figure is for reference only.
Front Panel I/O Connectivity Design Guide.
®
JFP2