Samsung CL65 Quick Start Manual page 119

Sending photos via Bluetooth
7
After sending is complete, select
The camera and the device are disconnected and the
Bluetooth feature turns off.
The camera may not search for a specific Bluetooth-enabled device
and send a photo to it depending on the device type.
If the other device does not have enough memory, the photo may not
be transferred. Delete some photos to free up some memory and try
sending again.
You cannot connect to several Bluetooth-enabled devices at one time.
Place the camera and the Bluetooth-enabled device reasonably close
to one another.
The camera may cause interference with other devices that use or
produce radio waves.
When there are no photos in the camera memory, you cannot use
this feature.
You can send photos only to Bluetooth-enabled phones or PDAs that
support the Object Push Profile (OPP).
Some phones or PDAs may not display photos you sent via Bluetooth.
Yes.
Wireless network/Bluetooth
106