Using The Hob - Electric (Ceramic); Hot Hob Warning; Using Rotary Controls - New World Oven Users Manual & Installation Handbook

UsInG tHe HoB - eLectRIc (ceRaMIc)

Warnings
• Do not use the ceramic
hob if the glass surface is
cracked, as electrical parts
are directly beneath. Switch
off the appliance at the sup-
ply to prevent electric shock
and contact your supplier.
• The hob surface remains
hot after use.
• Do NoT ToUcH.

Using Rotary controls

• Select the element you wish to use,
place the pan on and turn the control
knob to the power setting you wish
to use.
• To switch off, turn the selected con-
trol knob to the 'off' position.
notes on use
• The power settings on the hob do
not indicate any set temperature and
cannot be used to judge one element
against another.
• During cooking, the elements will
cycle on and off. This is to prevent
the hob from overheating.
• Pans should not be allowed to come
into contact with coloured trims dur-
ing use as this may cause discoloura-
tion of the surface

Hot Hob Warning

(if fitted)
The surface of the hob gets hot
in use. Your hob may have:
•The word "hot" written on it,
as a cautionary note that the
surface will become hot during
use.
•The word "hot" written on
it, with the addition of a light
beneath it. This light will il-
luminate when any element
is used and remains lit for a
while after all elements have
been switched off to show that
the surface may still be hot to
touch.