EnGenius ETA1305 User Manual page 25

I
NSTALLATION
2. Click Next to continue or Prev to return to the previous
screen. If your AP is not visible at this time, click Refresh
to re-load the AP/SSID screen.
Figure 2-8: CB Mode: Selecting an AP
3. In the AP Profile Setting menu, enter the network name
(SSID) of the selected AP.
4. From the Encryption drop-down menu, select the security
type associated with the AP profile.
Disable:

WEP:

WAP Pre-Shared Key:

WPA RADIUS:

5. In the WPA Type option, click the radio button to select
WPA (TKIP) or WPA2(AES) security type.
6. From the Pre-Shared Key Type drop-down menu, select
Passphrase or Hex (64 characters).
7. Enter the key information associated with the Pre-Shared
Key Type selection.
Figure 2-9: CB Mode: AP Profile Settings
8. Click Next to continue or Prev to return to the previous
screen.
Continue with the process by setting up your device pass-
word.
Setup your Device Password
This section guides you in creating a password to access the
new AP entry.
1. From the Device Password menu, enter the password
phrase in the New Password field. Type it again in Repeat
New Password to verify.
2-8
W
IZARD