Important Safety Instructions - Apex Digital dBZ-48 User Manual

Stereo zone mixer
Hide thumbs Also See for dBZ-48:
Table of Contents

Advertisement

Important safety instructions

CAUTION: to reduce the risk of electric shock, do not
remove cover (or back). No user-serviceable parts
inside. Refer servicing to qualified service personnel.
The lightning flash with arrowhead symbol,
within equilateral triangle, is intended to
alert the user to the presence of uninsulated
"dangerous voltage" within the product's enclosure that
may be of sufficient magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to
the presence of important operating and
maintenance (servicing) instructions in the literature
accompanying the appliance.
Instructions
Before installing or operating the equipment, read all
safety instructions, warnings and operating instructions.
Heed all warnings. Follow all instructions. Keep all
safety, installing and operating instructions for future
reference.
Installing and operating location
Do not use this apparatus near water. Do not expose
this apparatus to drips or splashes. Do not place
any objects filled with liquids, such as vases, on the
apparatus.
Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat. No naked flames, such
as lighted candles, should be placed on the apparatus.
Do not install the apparatus in a confined space such as
a book case or similar unit. Do not block any ventilation
openings.
Ensure that foreign objects and liquids cannot get into
the equipment.
Install in accordance with the manufacturer's instructions.
Only use attachments/accessories specified by the
manufacturer.
Use only with the cart, stand, tripod, bracket or
table specified by the manufacturer, or sold with the
apparatus.

Important safety instructions
When a cart is used, use caution when
moving the cart/apparatus combination to
avoid injury from tip over.
The apparatus should be located close enough to the
AC outlet so that you can easily grasp the power cord
plug at any time.
The mains plug, the appliance coupler or the mains
switch is used as the disconnect device. Either device
shall remain readily operable when the apparatus is
installed or used.
Power source and grounding
This product should be operated only from the power
source indicated on the apparatus or in the operating
instructions. If you are not sure of the type of power
supply to your home, consult your product dealer or
local power company.
Do not defeat the safety purpose of the polarised or
grounding-type plug. A polarised plug has two blades
with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide
blade or the third prong is provided for your safety. If
the provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
Connect Class I construction apparatus to an AC outlet
with a protective grounding connection.
Do not overload wall outlets, extension cords or integral
convenience receptacles, as this can result in a risk of
fire or electric shock.
Protect the power cord from being walked on or pinched,
particularly at plugs, convenience receptacles and the
point where they exit form the apparatus.
Unplug this apparatus during lightning storms or when
unused for long periods of time.
Batteries (battery pack or batteries installed) should not
be exposed to excessive heat such as sunshine, fire or
the like. Never dispose of batteries in a fire as they may
explode and cause injury.
CAUTION: Danger of explosion if battery is incorrectly
replaced. Replace only with the same or equivalent
type.

Advertisement

Table of Contents
loading

Table of Contents