Jacuzzi ProTech LCD Owner's Manual page 12

Export J-350/J-360/J-370 Models (50Hz)
Voltage:
Number of Wires
Frequency:
Current Draw:
Circuit Breaker:
Important Information:
* In 20A configuration, the heater will not operate while either jets
pump is running in high speed. Note: jets pump 2 runs only in high
speed. This is the factory setting.
** In 30A configuration, the heater will not operate when both jets
pumps are running in high speed. Note jets pump 2 runs only in
high speed.
*** In 40A configuration, the heater will operate while both jets pumps
are running in high speed.
All export models can be adapted to use higher amperage circuits when
available. Please contact your dealer for details. The electrical supply for
this product must comply with local electrical regulations.
Export J-380 Models (50Hz)
Voltage:
Number of Wires
Frequency:
Current Draw:
Circuit Breaker:
Important Information:
* In 40A configuration, the heater will operate while any two jets
pumps are running in high speed. Note: jet pumps 2&3 run only in
high speed. This is the factory setting.
** In 35A configuration, the heater will not operate while any two jets
pumps are running in high speed. Note: jet pumps 2&3 run only in
high speed.
All export models can be adapted to use higher amperage circuits when
available. Please contact your dealer for details. The electrical supply for
this product must comply with local electrical regulations.
Page 8
230V/20A*
230 VAC
3
50Hz
15A
20A
230V/40A*
230 VAC
3
50Hz
32A
40A
230V/30A**
230 VAC
3
50Hz
23A
30A
230V/35A**
230 VAC
3
50Hz
26A
35A
230V/40A***
230 VAC
3
50Hz
29A
40A