Jacuzzi Luxury/Designer Bath Series K339000X Installation & Operation Instructions page 22

RapidHeat TM
These units have a RapidHeat
heater will help maintain the temperature of the water in the bath.
Operation
With the heater installed and the whirlpool pump is operating, the heating func-
tion is totally automatic. No user control required.
Vacuum/Pressure Switch
The heater is equipped with a preset vacuum/pressure switch which will not al-
low the heater to turn ON if the pump is not running with water flowing through the whirlpool system.
High-Limit Switch
The heater includes an exclusive High-Limit switch. This safety circuit will not false trip from hot tap water. It will only turn off
the heater if the thermostat fails. To reset, press the button. If the high-limit trips frequently, contact your Authorized Electrical/
Mechanical Service Provider. Visit our web site at http://www.jacuzzi.com/.
To find service agent listings for:
Electrical or Mechanical Repairs visit http://jacuzzi.com/pdf/ASA.PDF
Finish, Surface, or Shell-Related Repairs visit http://jacuzzi.com/pdf/AFC.PDF
Repair Parts or Accessories visit http://jacuzzi.com/pdf/MPD.PDF
OPERATING INSTRUCTIONS (cont'd)
TM
heater installed on the intake or discharge lines. The
HIGH LIMIT RESET
OVER HEAT
PROTECTION
PUSH TO RESET
22
Jacuzzi Whirlpool Bath K339000X 3/06
HEATER ON
HEATER ON