YORKVILLE TRAYNOR YCS50 Service Manual page 13

PRODUCTION NOTES
1. DO NOT STUFF the headphone circuit parts that have a large 'X'
through them. The DNS parts also have X shown on the
actual board on the silkscreen legend.
2. Lay C126 flat before RTVing.
3. Bend C21X as flat as possible towards components
R210X and X34 before RTVing.
4. Wave solder in the indicated direction.
5. YCS90 ONLY
T&R, Remove R256 and R257.
SEE LAYOUT DIAGRAM
M1294 YCS50 / 90
PC# 7446
ONLY FOR YCS90
T&R REMOVE R256 AND R257