Terminals; Cable Management - Sylvania LC 401SS2 Owner's Manual

Terminals

12
13
Side Panel
9 HDMI 3 Input jack
10 USB terminal
9
Use this terminal only to play back the picture (JPEG) and
10
video (Motion JPEG) fi les stored on a USB storage device,
or when software update is needed.
11 S-Video / Composite Video / Audio (L/R)
Input jacks for VIDEO 2
Rear Panel

12 Cable management

11
13 AC power cord Inlet
14 HDMI 2 Input jack
15 HDMI 1 (HDMI-DVI) Input jack
HDMI connection for HDMI or DVI device.
14
When you connect your PC that has a DVI terminal,
15
you can enjoy this unit as a PC monitor.
16 Antenna Input jack
17 S-Video / Composite Video / Audio (L/R)
16
Input jacks for VIDEO 1
18 Component Video / Audio (L/R)
17
Input jacks
18 19 Digital Audio Output jack
20 Analog Audio (L/R) Output jacks
19
21 Analog Audio (L/R) Input jacks for HDMI 1
20
Input jack
21
Audio cable connection from a DVI device.
When you connect your PC that has a DVI terminal, use
a stereo mini plug conversion cable as well.
(For HDMI 1 Input jack only)
Note for USB terminal
• User should not connect any devices to the USB terminal such as
digital camera, keyboard, mouse, etc. (because these will not work).
• The software update is, in most cases, handled by an authorized
service person or in some circumstances the user may be asked
to do the software update themselves.
Cable Management
Keep the cables through this holder to avoid tangling them.
9
English
➠
p. 10, 25
➠
p. 27
➠
p. 26
➠
p. 9
➠
p. 10
➠
p. 10, 25
➠
p. 10, 25, 27
➠
p. 10
➠
p. 26
➠
p. 10, 26
➠
p. 27
➠
p. 27
➠
p. 25, 27