Operating Instructions - Black & Decker Matrix BDCMTOSS Instruction Manual

SYMBOlS
• The label on your tool may include the following symbols. The symbols and their definitions
are as follows:
V ..................volts
Hz ................hertz
min ..............minutes
or DC ..direct current
................Class I Construction
(grounded)
................Class II Construction
(double insulated)
............Read instruction manual before use
................Use proper eye protection
SAVE ThESE INSTRUCTIONS
FUNCTIONAl DESCRIPTION - FIGURE A
1. Garden shear hedge trimmer attachment 2. Grass shear blade
4. Blade release button
ASSEMBlY
DANGER:
result in serious personal injury.
WARNING:
before making any adjustments or removing or installing attachments or accessories.
REMOVING ThE BlADE - FIGURE B
• To remove the blade cover (5) push and hold the blade release button (4) in the direction of
the arrow (fig. B)
• Slide the blade cover (5) backwards and lift it off (fig. B). remove blade.
FITTING ThE BlADE - FIGURE C, D
• To install the blade cover, position blade and garden shear hedge trimmer attachment as
shown in figure C.
• Fit blade onto the pins on the garden shear hedge trimmer attachment as shown in figure C1.
NOTE:
The retaining magnet (7) will keep blade secured to garden shear hedge trimmer
attachment.
• Place thumb on blade away from cutting area as shown in figure D. Align blade cover tabs
as shown in figure D1.
• Slide blade cover forward until and audible click is heard and the cover is locked into position.
NOTe: Alignment of blade with drive pin and alignment of the back of the blade and the
retaining magnet (7) is required when re-fitting the blade cover.

OPERATING INSTRUCTIONS

DANGER:
result in serious personal injury.
WARNING:
used near water.
kEEP hANDS AWAY FROM BlADE.
To reduce the risk of injury, turn off and remove battery from tool
kEEP hANDS AWAY FROM BlADE.
Shock hazard.
A ...................amperes
W ..................watts
or AC .......alternating current
n o .................no load speed
.................earthing terminal
................safety alert symbol
.../min or rpm...revolutions or
reciprocation per minute
.................Use proper respiratory protection
.................Use proper hearing protection
5. Blade cover
Under no circumstances should this product be
4
3. Hedge trimmer blade
6. Active lock-off button
Contact with blade will
Contact with blade will