Use Your Headset; Connect The Headset To A Bluetooth Device; Manage Your Calls And Music - Philips SHB5800 User Manual

5 Use your
headset
Connect the headset to a
Bluetooth device
1
Turn on your mobile phone/Bluetooth
device.
2
Press and hold the on/off button to turn
the headset on.
» The blue LED flashes.
» The headset is reconnected to
the last connected mobile phone/
Bluetooth device automatically. If the
last one is not available, the headset
tries to reconnect to the second last
connected device.
Tip
•
If you turn on the mobile phone/Bluetooth device or
activate the Bluetooth feature after turning on the
headset, you have to reconnect the headset and mobile
phone/Bluetooth device manually.
Note
•
If the headset fails to connect to any Bluetooth device
within range in 5 minutes, it will switch off automatically
to save the battery life.

Manage your calls and music

On/off, call/music control button
Task
Turn the headset
on.
6 EN
Operation Sound
or LED
indicator
Press and Power on
hold for 2 tone
seconds.
Turn the headset
off.
Play or pause
music.
Pick up/hang up
a call.
Reject an
incoming call.
Redial the last
number.
Switch caller
during a call.
Volume/Track control button
Adjust volume.
Skip forward.
Skip backward.
Other headset indicator status
Headset status
The headset is connected
to a Bluetooth device,
while the headset in
standby mode or while you
are listening to music.
The headset is ready for
pairing.
The headset is on but not
connected to a Bluetooth
device.
There is an incoming call.
The battery level is low.
The battery is fully charged.
Press and Power off
hold for 4 tone
seconds.
Press once. N/A
Press once. 1 short
beep
Press and 1 short
hold beep
Press twice. 2 short
beeps
Press twice 1 short
beep
Press once
Press and hold
Press and hold
Indicator
The blue LED
flashes for every
6 seconds.
The LED flashes
blue and white
alternately.
The blue LED
flashes quickly.
The blue LED
flashes once per
second.
The white LED
flashes.
The white LED
is off.
N/A
N/A
N/A