Setup Menu (Rgb Mode) - Hitachi 26LD9000TA User Manual

MENU OPERATION (continued)

Setup Menu (RGB mode)

With this menu, you can adjust the display condition of the image which is inputting from the RGB terminals.
By pressing ▼ button at the bottom of the 1st Setup menu page, the 2nd Setup menu page will appear on the screen.
Selected Items
Auto Adjustment
Image Position*
Horizontal Clock*
Clock Phase*
Reset
Adjust Horizontal Position, Vertical Position, Horizontal
Clock, and Clock Phase automatically.
• Press button to start auto adjustment.
The message "Auto Adjusting" is displayed.
• Depending on the type of the signal, there is a possibility
that the display may not be adjusted in its optimum
condition with this function. In that case, please adjust
Adjust the display position horizontally.
• When the position exceeds the possible range, the
display color will turn into Magenta.
Minimize the vertical stripes on the screen.
0~63
Minimize the blurring of the letters and stripes on horizontal
row.
0~100
• Make sure to adjust Horizontal Clock first before
adjusting Clock Phase.
Reset image position.
Setup
Auto Adjustment : ►
►
Image Position :
Horizontal Clock :
41
Clock Phase :
34
Reset :
Reset
◄►
Select Set Return
Setup hint
25