Raid Page - D-Link ShareCenter Pulse DNS-320 User Manual

D-Link ShareCenter Pulse User Manual
where each drive is a unique volume, JBOD, which combines both drives in a linear
fashion to create one volume, as well as RAID 0 and RAID 1.
Here the user can view the current RAID coniguration
and also (re-)conigure the RAID setup.
Click on the 'Set RAID Type and Re-Format' button to
change the current drive coniguration. All data will
be lost on your hard drives when changing the drive
coniguration.
To conigure the remaining space into a new volume,
click on the 'Create A New Volume From The Remaining
Available Storage Space' button.
inserted hard drive. Notice that the data stored in formatted drives will be erased
during the process.
In the section the user can view the physical hard disk
information. Information displayed are:
1) Which slot is used.
2) The Hard Drive Vendor abbreviation.
3) The Hard Drive Model Code.
4) The Hard Drive Serial Number.
5) The Hard Drive Size.
Page 65