Sony DSX-A30 Operating Instructions Manual page 21

Error displays/Messages
CHECKING
 The unit is confirming the connection of a
USB device.
– Wait until confirming the connection is
finished.
ERROR
 There may be an internal malfunction.
– Press  for more than 2
seconds (the display disappears), then press
 again.
ERROR-01
 There may be an internal malfunction.
– Check the connection. If the error indication
remains on in the display, consult your
nearest Sony dealer.
 The connection of speakers/amplifiers is
incorrect.
– See the installation/connections manual of
this model to check the connection.
ERROR-99
 There may be an internal malfunction.
– Press  for more than 2
seconds (the display disappears), then press
 again. If the error
indication remains on in the display, consult
your nearest Sony dealer.
NO MUSIC
 The USB device does not contain a music file.
– Connect a USB device with a music file in it.
NO NAME
 An album/artist/track name is not written in
the USB.
NO SUPRT (Not Supported)
 USB hub is not supported on this unit.
 The connected USB device is not supported.
– For details on the compatibility of your USB
device, visit the support site.
NO USB
 USB is selected as source without a USB device
connected. A USB device or a USB cable has
been disconnected during playback.
– Be sure to connect a USB device and USB
cable.
OVERLOAD
 USB device is overloaded.
– Disconnect the USB device, then change the
source by pressing .
– Indicates that the USB device is out of order,
or an unsupported device is connected.
READ
 The unit is reading all track and album
information on the USB device.
– Wait until reading is complete and playback
starts automatically. Depending on the USB
device structure, it may take more than a
minute.
If these solutions do not help improve the
situation, consult your nearest Sony dealer.
21