Sleep And Charge - Toshiba U940 User Manual

In addition there are also three buttons: OK, Cancel and Apply.
OK
Cancel
Apply
Some options shown in grey are possible to confirm their status.
General
This window displays the installed BIOS version, date and EC version.
Set all settings to
default

Sleep and Charge

This tab allows you to set advanced features when the power of the
computer is turned OFF. "Power OFF" includes Sleep Mode, Hibernation
Mode or shutdown state.
It also displays the remaining battery capacity.
Sleep and Charge
Your computer can supply USB bus power (DC5V) to the USB port even
when the computer is turned OFF.
This function can be used for ports that support the Sleep and Charge
function.
The port with the icon (
Move the slider to enable or disable this function.
Enabled
Disabled
User's Manual
The Sleep and Charge function may not work with certain external
devices even if they are compliant with the USB specification. In those
cases, turn the power of the computer ON to charge the device.
Accepts your changes and closes the TOSHIBA
System Settings window.
Closes the window without accepting your
changes.
Accepts all your changes without closing the
TOSHIBA System Settings window.
Return all values to the factory default settings.
) has Sleep and Charge function.
Enables the Sleep and Charge function. Then
you can use this function to charge certain USB-
compatible external devices such as mobile
phones or portable digital music players.
Disables the Sleep and Charge function.
5-8