Table of Contents
Advertisement
USER MANUAL
520 & 750 // UNDERMOUNT HOOD
ARU52X | ARU75X
IMPORTANT // Please ensure that you read through this user manual prior to installation and use. This
manual contains important information to ensure optimal performance and keep you safe. Please retain
your proof of purchase, as this will be required in the event that you require warranty service. Remember
to retain this manual for future reference.
www.aristonbrand.com
Advertisement
Table of Contents
Related Manuals for Ariston ARU52X
Summary of Contents for Ariston ARU52X
- Page 1 USER MANUAL 520 & 750 // UNDERMOUNT HOOD ARU52X | ARU75X IMPORTANT // Please ensure that you read through this user manual prior to installation and use. This manual contains important information to ensure optimal performance and keep you safe. Please retain your proof of purchase, as this will be required in the event that you require warranty service.
-
Page 2: Hello
HELLO CONGRATULATIONS ON THE SELECTION OF THIS ARISTON APPLIANCE. ARISTON APPLIANCES HAVE BEEN SPECIFICALLY DESIGNED FOR AUSTRALIAN AND NEW ZEALAND KITCHENS. Please read through this user manual carefully as it contains information that will ensure that your appliance is installed correctly, important operating &... -
Page 3: Table Of Contents
CONTENTS HELLO CONTENTS WARNING & SAFETY INFORMATION INSTALLATION & DUCTING OPERATING INSTRUCTIONS MAINTAINING YOUR RANGEHOOD PRODUCT SPECIFICATION PROOF OF PURCHASE NOTES CONTACT DETAILS pg 3 | www.aristonbrand.com... -
Page 4: Warning & Safety Information
WARNING & SAFETY INFORMATION This appliance is not intended for use The minimum distance between the by persons (including children) with hob surface and the lowest part of the reduced physical, sensory or mental rangehood is 600mm. This distance shall be at least 650mm, if the capabilities, or lack of experience and knowledge, unless they have been rangehood is installed over a gas hob. -
Page 5: Installation & Ducting
INSTALLATION & DUCTING IMPORTANT // Before handling the rangehood during installation, it is recommended that you remove the filter to prevent damage. Fig 1.2 illustrates the minimum height from the hob surface to the underside of the rangehood. Electric hob – 600mm, Gas hob - 650mm. 4 Fascia Screws Minimum Height Electric Hob 600mm... - Page 6 INSTALLATION & DUCTING TOP DUCTING SIDE DUCTING RE-CIRCULATING (Carbon filter required) DUCTED OPTION NOTICE // ALL DUCTING MATERIAL MUST BE COMPLIANT WITH THE LOCAL LAWS IN FORCE. INSTALLATION 1. Remove the filter and light globes. (If installed) 2. Remove the stainless steel fascia (4 screws) – take care not to damage the fascia. 3.
-
Page 7: Operating Instructions
OPERATING INSTRUCTIONS FAN SPEED OFF/LOW/MEDIUM/HIGH switch - located on the left hand side of the control panel. This unit features 3 speed settings; single line indicate low speed, double lines indicate the medium speed & triple lines indicate high speed. To turn the unit off, set the speed switch to the 0 position (off). -
Page 8: Maintaining Your Rangehood
MAINTAINING YOUR RANGEHOOD GENERAL MAINTENANCE Ensure that the power to the unit is switched off prior to cleaning the unit. Surface should only be cleaned with warm soapy water and a soft non-abrasive cloth. In coastal environments and humid areas more frequent cleaning is required to maintain the finish. FILTERS These filters should be cleaned frequently, dependant on use (minimum monthly). -
Page 9: Product Specification
PRODUCT SPECIFICATION MODEL: ARU52X SERIAL: 230V ~ 50Hz Lights 2 x 40W Total: 180W Motor: 100W www.aristonbrand.com For service please call: Australia: 1300 815 589 New Zealand: 09 306 1020 5364 MODEL: ARU75X SERIAL: 230V ~ 50Hz Lights 2 x 40W... -
Page 10: Proof Of Purchase
PROOF OF PURCHASE ATTACH YOUR PROOF OF PURCHASE FOR FUTURE REFERENCE pg 10 www.aristonbrand.com |... -
Page 11: Notes
NOTES pg 11 | www.aristonbrand.com... -
Page 12: Contact Details
Ph (09) 306 1020 FX (09) 302 0077 sales@aristonappliances.co.nz ARISTON IS COMMITTED TO ONGOING RESEARCH AND DEVELOPMENT. EVERY EFFORT HAS BEEN MADE TO ENSURE ALL INFORMATION IN THIS USER MANUAL IS CORRECT AT TIME OF GOING TO PRINT. DIMENSIONS SHOULD BE USED AS A REFERENCE ONLY AND ACTUAL DIMENSIONS SHOULD BE TAKEN FROM THE PHYSICAL PRODUCT ONLY.