Restarting The Device; Locking And Unlocking The Device - Samsung Galaxy S4 User Manual

Important! The device name is also used to provide an
identification for your device's Bluetooth and Wi-Fi
Direct names.
3. Tap Finish to complete the setup process.
4. Read the on-screen Collect diagnostics information.
Note: This software collects only diagnostic data from your
device so that T-Mobile technicians can better
troubleshoot issues with your device.
5. Select either More info (to read additional information)
or Close to close the message screen.
Important! Selecting Close only closes the current description
screen and does not disable data collection.
To disable data collection, go to Settings
Accounts tab
diagnostics and turn off the Allow diagnostics to be
collected feature. For more information, refer to
"Collect Diagnostics" on page 304.
17
Backup and reset Collect

Restarting the Device

1. Press and hold
options screen appears.
2. Tap Restart ( ).

Locking and Unlocking the Device

By default, the device screen locks when the backlight turns
off.
Place your finger on the screen and swipe the glass in
any of the directions shown unlock the device.
Note: You can choose to configure lock settings to prevent
unauthorized use of your device. For more information,
refer to "Security" on page 305.
(Power/End) until the Device