Section 3 - Configuration
The Security tab allows you to configure your router's firewall settings and enable features to protect your network from outside intrusions and
malicious attacks.
Click Add to add a new filtering rule.
Active:
Check the box to activate the IP filter rule.
Source IP:
Enter the source IP address to be filtered.
Source From
Enter the starting port on the source IP.
Port:
Source To Port:
Enter the ending port on the source IP.
Destination IP:
Enter the destination IP address to be filtered.
Destination From
Enter the starting port of the destination IP.
Port:
Destination To
Enter the ending port of the destination IP.
Port:
Protocol:
Select the protocol for the IP filter rule.
Delete:
Click the icon to delete the IP filtering rule.
Click OK. to save the filtering rule. Click Apply to save the
current configuration.
D-Link DWR-730 User Manual
Security
Firewall
IP Filter
37