Sony MEX-BT4050U Operating Instructions Manual page 30

5
Rotate the control dial to select the
subwoofer position from "NEAR,"
"NORMAL" or "FAR," then press it.
6
Press
To cancel the listening position, select
"OFF" in step 3.
Adjusting the listening
position
You can fine-tune the listening position
setting.
1
During reception/playback, press the
select button.
2
Rotate the control dial until "ADJ
POSITION" appears, then press it.
3
Rotate the control dial to adjust the
listening position, then press it.
Adjustable range: "+3" – "CENTER" –
"–3."
4
Press
DM+ Advanced
DM+ Advanced improves digitally
compressed sound by restoring high
frequencies lost in the compression process.
1
During playback, press the select
button.
2
Rotate the control dial until "DM+"
appears, then press it.
3
Rotate the control dial to select "ON,"
then press it.
4
Press
Tip
The DM+ setting can be memorized for each
source.
30
(BACK).
(BACK).
(BACK).
Using rear speakers as a
subwoofer — Rear Bass
Enhancer
Rear Bass Enhancer enhances the bass
sound by applying a low pass filter setting
(page 32) to the rear speakers. This function
allows the rear speakers to work as a
subwoofer if one is not connected.
1
During reception/playback, press the
select button.
2
Rotate the control dial until "RB ENH"
appears, then press it.
3
Rotate the control dial to select from
"1," "2" or "3," then press it.
4
Press (BACK).