Function - Ford 2013 EXPLORER Quick Reference Manual

Func tion
ReaRview caMeRa*
This system provides a visual display of
the area behind the vehicle. The display
automatically appears in the touch screen
when the vehicle is in R (Reverse) and
uses green, yellow and red guides to
alert you of your proximity to objects. For
non-touch screen vehicles, the image will
appear in the 4.2 in display.
ReveRSe SenSing SySteM*
This system sounds a warning tone if
there is an obstacle near the vehicle's rear
bumper when the vehicle is in R (Reverse)
and is traveling less than 3 mph (5 km/h).
The warning tone will increase in
frequency as the object gets closer.
note: Visibility aids do not replace the
need to watch where the vehicle is moving.
Refer to your Owner's Manual for safety
information, more details and limitations.
14
bLind SPot inFoRMation
SySteM (bLiS ) with cRoSS
®
tRaFFic aLeRt (cta)*
BLIS uses sensors to help you determine
if a vehicle may be in your blind spot
zone. The CTA feature alerts you if a car
is coming toward you when you are
backing out of a parking space. BLIS
and CTA will display a yellow indicator
light in your exterior mirrors and the
CTA will also sound tones and display
messages to warn you which direction
vehicles are approaching. Refer to the
Driving Aids chapter in your Owner's
Manual for more information.
SeLectShiFt autoMatic™
tRanSMiSSion*
Gives you the ability to manually change
gears if you'd like. To use, move the
gearshift lever from D (Drive) to S (Sport).
Then use the toggle on your gear shift
lever to make shifts manually. Press the
(+) button to upshift, press the (–) button
to downshift.
MyKey
®
MyKey allows you to program certain
driving restrictions in order to promote
good driving habits. You can program
things like; speed restrictions, limited
volume levels and safety belt reminders.
*
(if equipped)
For complete information, refer to the
MyKey chapter in your Owner's Manual.
SecuRicode™ KeyLeSS
entRy SySteM*
Allows you to lock or unlock the doors
using the touchpad. You will need your
five digit factory code located on your
owner's wallet card in the glove box.
Refer to the Locks chapter in your
Owner's Manual for more information
on how to use SecuriCode.
PoweR LiFtgate*
Your liftgate has an automatic open
and closing feature. To open remotely,
press twice on your keyhead within
three seconds. Press twice again to
close or reverse the movement. You can
also operate the liftgate by pressing
the control located on the
instrument panel.