Connecting The External Devices - JVC TU-DB1SU Instructions Manual

CONNECTING THE EXTERNAL DEVICES

If your TV and VCR both have two scart sockets you can connect as follows.Unplug the aerial lead and
connect this to the ANT IN socket on the rear of your receiver. Connect the aerial lead (supplied) from the
LT OUT on the receiver to the ANT IN on the rear of the VCR. Then connect an aerial lead from the LT OUT
on the VCR to the ANT IN socket on the rear of your TV.
If your VCR has only one scart socket, connect only Scart 1 to VCR.
Connect a scart lead from the TV SCART socket on the rear of the receiver to the SCART 1 socket on the
rear of the TV.
Connect a scart lead from the VCR SCART to the SCART 1 on the VCR, and connect a scart lead from
the SCART 2 on the VCR to the SCART 2 on the rear of the TV.
UW
6r…vhy
I‚‡Ãˆ†r
You can now record digital terrestrial television programmes by selecting SCART 1 on the VCR. The VCR
will also be able to record analogue television channels in the usual way. Both live and recorded digital terrestrial
television programmes can be viewed on the TV by selecting the TV's AV input.
UW
6r…vhyÃPˆ‡
6r…vhyÃD
6 IU@II6Ã 6IU@II6Ã
PVU DI
W8S
UW W8S9WS
UWÃ6r…vhy
- 19 -
Tph…‡Ã
Tph…‡Ã!
98ÃDIÃ%W
9DBDU6 GÃ6 V9DPÃPVUÃ
8P6YD6GÃ
S
CvAv