Basic Connections; Projector + Av Device; Projector + Dvd Player Or Hdtv Decoder - Mitsubishi Electric XL5950U User Manual

Srgb
Hide thumbs Also See for XL5950U:
Table of Contents

Advertisement

Basic connections

This projector can be connected with various devices such as a VCR, video camera, videodisc player, and personal
computer that have analog RGB output connectors.
Important:
• Make sure that the connected device is turned off before starting connection.
• Plug in the projector and the connected devices firmly, and unplug them by holding and pulling out their
power plugs, not by pulling the power cords.
• When the projector and the connected devices are located too close to each other, the projected image may be
affected by their interference.
• See the owner's guide of each device for details about their connections.

Projector + AV device

Important:
• Connect the video and audio plugs of the AV cable to the proper terminals matching their colors respectively.
• When the connected AV device uses a BNC connector for its video output, connect it to the VIDEO 1 (BNC)
terminal. When both the VIDEO 1 (BNC) terminal and the VIDEO 2 (RCA) terminal are engaged at the same
time, the image supplied to the VIDEO 2 (RCA) terminal takes priority.
• When the connected AV device uses a BNC connector for its S-video output, connect it to the VIDEO 2
(Y,C)(BNC) terminal. When both the VIDEO 2 (Y,C) (BNC) terminal and the S-VIDEO 2 terminal are engaged
at the same time, the image supplied to the S-VIDEO 2 terminal takes priority.
When using the video (RCA) or S-video connector When using the BNC connector
To S-video output
To S-video input

Projector + DVD player or HDTV decoder

Some DVD players have an output connector for 3-line fitting (Y, C
with this projector, use the COMPUTER/COMPONENT VIDEO INPUT 1 terminal.
• The terminals' names Y, P
• The terminals' names are different depending on the connected devices.
• Use BNC-BNC cables for connection.
• The image may not be projected correctly with some DVD players.
• When connecting a HDTV decoder having RGB output terminals, set the COMPUTER INPUT to RGB in the
SIGNAL menu.
EN – 10
S-VCR, etc.
VCR, etc.
To audio output
To video output
To video input
To audio input
DVD player or HDTV decoder
to AUDIO OUT
, and P
are examples of a case where a HDTV decoder is connected.
B
R
, C
B
R
B
C
(P
)
B
B
Y
G
C
(P
)
R
R
R
BNC-RCAconnector
(option)
COMPUTER AUDIO IN
AUDIO cable (option)
S-VCR, etc.
To Y output
To S output
To Y input
To S input
To audio input
To video input
). When connecting such a DVD player
BNC-BNC cable (option)
B/P
B
G/Y
R/P
R
VCR, etc.
To audio output
To video output

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xl5900luXl5900uXl5950lu

Table of Contents