Advertisement
10
After selecting a Target curve, double-click the Send Filter button to transfer the
settings to the PXA-H100. Choose either Curve Memory 1 or Curve Memory 2 to
store in PXA-H100 memory.
• You can store two curve settings for one measurement result.
11
If you are not satisfied with the measurement result, you can start from the procedure
in step 7 by double-clicking the Re-Measure button.
• If you perform the measurement again using the Re-Measure button, note that the previously stored settings in
the PXA-H100 will be cleared and replaced by the new one.
12
When the memory setting is complete, click x on the right side of the screen and
double-clicking OK on the EXIT screen to close the IMPRINT SOUND MANAGER
programme.
13
After you have finished the MultEQ calibration, disconnect the USB Cable from the
PXA-H100.
14
Now, relax and enjoy the fruits of your labour with the newly, IMPRINT optimized
system. By turning MultEQ on and off with this just calibrated Alpine head unit, the
benefits of calibration are obvious.
For details on operating this IMPRINT compatible Alpine head unit, refer to its Owner's Manual.
About Trademark
• Audyssey MultEQ XT is a registered trademark of Audyssey Laboratories Inc.
• Microsoft and Windows are trademarks, or registered trademarks of Microsoft Corporation in the United
States and/or other countries.
6
-EN
Autogood products internet store http://130.com.ua
Advertisement
