Table of Contents
Advertisement
Audio System
The Repeat function
REPEAT
continuously replays the current
song or passage. Press the RPT
button to activate it; you will see RPT
displayed as a reminder. When the
system reaches the end of the song
or passage currently playing, it will
automatically go into rewind. When
it senses the beginning of the same
song or passage, the system returns
to PLAY mode. It will continue to
repeat this same program until you
deactivate REPEAT by pressing the
button again.
Pressing the REW or FF button, or
either of the SKIP buttons, also turns
off REPEAT.
142
Comfort and Convenience Features
The SKIP and REPEAT functions
use silent periods on the tape to find
the end of a song or passage. These
features may not work to your
satisfaction if there is almost no gap
between selections, a high noise
level between selections, or a silent
period in the middle of a selection.
Caring for the Cassette Player
Damaged cassettes can jam inside
the drive or cause other problems.
See page
168
for information on
cassette care and protection.
Advertisement
Chapters
Table of Contents
