Mac Address Filter - D-Link DWR-921 User Manual

Section 3 - Configuration
The MAC (Media Access Controller) Address Filter option is used to control network access based on the MAC address of the network adapter.
A MAC address is a unique ID assigned by the manufacturer of the network adapter. This feature can be configured to ALLOW or DENY network/
Internet access. After modifying any settings, click Save Settings to save your changes.
MAC Address Control:
Connection Control:
Association Control:
ID:
MAC Address:
IP Address:
C:
A:
D-Link DWR-921 User Manual

MAC Address Filter

MAC FILTERING SETTINGS
Tick this box to enable MAC Filtering.
Check the box to allow wireless and wired clients with C
selected to connect to this device. You can also select to allow
or deny connections from unspecified MAC addresses.
Check the box to allow wireless clients with A selected can
associate to the wireless LAN. You can also select to allow or
deny connections from unspecified MAC addresses.
MAC FILTERING RULES
This identifies the rule.
Specify the MAC address of the computer to be filtered.
Specify the last section of the IP address.
If this box is ticked, the rule will follow the connection control
setting specified in MAC filtering settings specified above.
If this box is ticked, the rule will follow the association control
setting specified in MAC filtering settings specified above.
40