Introduction; Specifications; Care For Your Card - Zte CDMA 1X User Manual

1. Introduction

ZTE CDMA 1X card fits into a standard Type II PC Card slot (available on most notebook PCs)
and can function as a wireless network card, a modem, and a mobile phone. This card allows you
to connect to the Internet, send and receive SMS messages, and make phone calls, without the
need of a network cable or phone line.
With the design of the R-UIM card separate from the body, ZTE CDMA 1X card can make the
operation more flexible.

2. Specifications

Model
Item
Transmit Frequency
Receive Frequency
Freq. Stability
Dimension
Weight
Data Transmission
Voltage
Current
Transmitter Power

3. Care for your card

Protect the card from liquids, dust, and excessive heat.
Optimal signal strength is usually obtained when the antenna is perpendicular to the card.
The antenna should bend easily. Do not forcefully bend the antenna or plugs the antenna in
and out ZTE CDMA 1X card frequently. ZTE shall not be held responsible for the loss due to
user's disoperation.
The ZTE CDMA 1X card should fit easily into your PC slot. Forcing the card into a slot may
damage connector pins.
Do not operate the ZTE CDMA 1X card near any equipment which may be susceptible to
electromagnetic interference.
ZTE Corporation
ZTE CDMA 1X Card User Guide
MC315
824~849MHz 824~849MHz
869~894MHz 869~894MHz
FA±300Hz
86*54*5 mm
33g
MAX 153.6 kbps
3.3V from PCMCIA Slot
Dormancy: 90mA Maximum
200mW
page1
MC315+ MG166
1850~1910MHz
1930~1990MHz
:
850mA
2005-6-16
MG466
452.5~457.5MHz
462.5~467.5MHz
http //www zteit com