Table of Contents
Advertisement
Table 4-1 Primary: TKR-750/850/751/851 transmits with a
configured signalling on each channel.
Status
PTT Priority
Repeater PTT <
Local Mic PTT,
External PTT
A channel becomes
free or a signalling of
Multi-table is
unmatched.
Repeater PTT >
Local Mic PTT,
External PTT
Repeater PTT <
Local Mic PTT,
TKR-750/850/751/851
External PTT
makes a repeat
operation since a
signalling on Multi-
Repeater PTT >
table is matched.
Local Mic PTT,
External PTT
Table 4-2 Current: TKR-750/850/751/851 transmits with a
encode signalling in order to match a Current decoded
signalling code.
Status
PTT Priority
Repeater PTT <
Local Mic PTT,
External PTT
A channel becomes
free or a signalling of
Multi-table is
unmatched.
Repeater PTT >
Local Mic PTT,
External PTT
Repeater PTT <
Local Mic PTT,
External PTT
TKR-750/850/751/851
makes the repeat
operation since a
signalling of Multi-
Repeater PTT >
table is matched.
Local Mic PTT,
External PTT
! Configuration of KPG-91D
" Configuring the Encode Tone in Multiple (Refer to
FPRG 6.2.7 Encode Tone in Multiple.)
" Configuring Operation Mode (Refer to FPRG 6.2.8
Operation Mode.)
Version: 1.01 USA
Operation
TKR-750/850/751/851 transmits a Primary signalling code configured on
each channel. It keeps to transmit the Primary code even if it receives a
signalling code of Multi-table during transmitting. When Local Mic PTT or
External PTT is released, It starts repeat operation with a Current signalling
code of Multi-table after transmitting a QT Reverse Burst or DQT Turn-off
Code of Primary code.
TKR-750/850/751/851 transmits a Primary signalling code configured on
each channel. It starts repeat operation with a Current signalling code when
it receives a signalling of Multi-table during transmitting. When the receiving
signalling code of Multi-table is unmatched, It starts to transmit Primary code
Local Mic PTT /
after transmitting a QT Reverse Burst or DQT Turn-off Code of Current
External PTT is
signalling code.
On
TKR-750/850/751/851 transmits a Priority signalling code configured on
each channel. When Local Mic PTT or External PTT is released while it is
receiving a Current signalling code, it starts repeat operation with the
Current signalling code of the Multi-table after transmitting a QT Reverse
Burst or DQT Turn-off Code of Primary signalling code.
TKR-750/850/751/851 keeps repeat operation with a Current signalling code
of Multi-table. When Local Mic PTT or External PTT keeps On and a
signalling of Multi-table is unmatched, It transmits a Primary signalling code
configured on a channel after transmitting a QT Reverse Burst or DQT Turn-
off Code of Current signalling code.
Operation
TKR-750/850/751/851 transmits a Primary signalling code configured on
each channel. It keeps to transmit the Primary code even if it receives a
signalling of the Multi-table during transmitting. When Local Mic PTT or
external PTT is released, It starts repeat operation with a Current signalling
code of Multi-table after transmitting a QT Reverse Burst or DQT Turn-off
Code of Primary signalling code.
TKR-750/850/751/851 transmits a Primary signalling code configured on
each channel. It starts repeat operation with a Current signalling code when
a signalling of Multi-table is matched during transmitting. When the
signalling of Multi-table is unmatched, It starts to transmit a Primary code
after transmitting a QT Reverse Burst or DQT Turn-off Code of Current
Local Mic PTT/
signalling code.
External PTT is
On
TKR-750/850/751/851 keep to transmit with the Current signalling code on
the Multi-table. When Local Mic PTT or External PTT is On and a signalling
of Multi-table is unmatched, it starts to transmit a Primary signalling code of
Multi-table after transmitting a QT Reverse Burst or DQT Turn-off Code of
Current signalling code.
TKR-750/850/751/851 keep to transmit a Current signalling code of Multi-
table.
When Local Mic PTT or External PTT is On and a signalling of Multi-table is
unmatched, it starts to transmit a Primary signalling code of Multi-table after
transmitting a QT Reverse Burst or DQT Turn-off Code of Current signalling
code.
Function Reference (FUNC)
4 CHANNEL INFORMATION
Description
Description
" Configuring the Multi Table (Refer to FPRG 6.2.9
Multi Table (Channel Edit).)
11
Advertisement
Table of Contents
