Sony PCGA-BM1 User Manual page 10

9
Click the "Next" button.
10
Click the "Have Disk" button.
11
Insert the Utility CD-ROM into the CD-ROM drive of the
notebook.
12
Click the "Browse" button to open the "Locate File" dialog
box. Select "PCGA-BM1(Modem).inf" on the CD-ROM drive,
and click the "Open" button.
z Hint
Instead of the above procedure, you can also enter "E*:\PCGA-BM1(Modem).inf"
in the "Copy manufacturer's file from:" field.
* E may also be another drive name.
13
Click the "OK" button.
14
Verify that "PCGA-BM1 (Modem)" is shown in the "Models"
list, and click the "OK" button.
15
Click the "Next" button.
16
Select the communications port checked in step 3, and click
the "Next" button.
The message "Digital Signature not found" may appear.
17
Click the "Finish" button.
18
Click the "OK" button.
"PCGA-BM1 (Modem)" is now installed under the "Modems" tab of
the "Phone and Modem Options" dialog box.
The modem installation is now complete.
Next, refer to the Operating Instructions of the PCGA-BM1.
GB
10