Disassembly Instructions; Removal Of Mechanical Parts And P.c. Boards; Removal Of Anode Cap - Toshiba VTV1403B Service Manual

1. REMOVAL OF MECHANICAL PARTS
AND P.C. BOARDS
1-1: BACK CABINET (Refer to Fig. 1-1)
Remove the 6 screws 1.
1.
Remove the AC cord from the AC cord hook 2.
2.
3. Remove the Back Cabinet in the direction of arrow.
Front Cabinet
1
1
1
1
1-2: CRT PCB (Refer to Fig. 1-2)
CAUTION: BEFORE REMOVING THE ANODE CAP,
DISCHARGE ELECTRICITY BECAUSE IT
CONTAINS HIGH VOLTAGE.
BEFORE ATTEMPTING TO REMOVE OR
REPAIR ANY PCB, UNPLUG THE POWER
CORD FROM THE AC SOURCE.
1. Remove the Anode Cap.
(Refer to REMOVAL OF ANODE CAP)
2. Disconnect the following connector:
(CP801).
3. Remove the CRT PCB in the direction of arrow.
Front Cabinet

DISASSEMBLY INSTRUCTIONS

1
2
Back Cabinet
1
Fig. 1-1
CRT PCB
Fig. 1-2
1-3: TV/VCR BLOCK (Refer to Fig. 1-3)
Remove the 2 screws 1.
1.
2. Disconnect the following connectors:
(CP302, CP402, CP501 and CP502).
Unlock the support 2.
3.
4. Remove the TV/VCR Block in the direction of arrow.
Front Cabinet
1-4: POWER PCB (Refer to Fig. 1-4)
Remove the 3 screws 1.
1.
2. Disconnect the following connectors:
(CP401A and CP851A).
3. Remove the Power PCB in the direction of arrow.
B1-1
1
2
UP TO
RELEASE
TV/VCR Block
1
1
1
Power PCB
TV/VCR Block
1
Fig. 1-3
Fig. 1-4