Sony S-Frame DPF-V900 Operating Instructions Manual page 46

Connecting a digital camera or other external device
$ ' J n " $ C k · l t i '
Cauii!silufIQn
~-y', y~".>_, _.,~:.>.
>
_~":~""
,.:':jv.
v
, ' ~
.".-.
:i' ' ' " ...:.:
<fet ',:;; .
" y
"~.,>;.:
The camera is • Is the cable connected .. Connect the cable properly.
connected but properly?
nothing is I-.-I-s-th-e-p-h-o-to-fr-am-e-tu-rn-e-d--+-"-T-u-rn-th-e-p-h-o-to-fr-a-m-e-o-n-.
- - - - - - - - - l
displayed. on?
Nothing happens
even if the USB
cable is
disconnected and
then connected.
Images are not
displayed on the
TV screen or LCD
screen.
Photo frame
• The input of the TV is set to
the external input.
.. An over current error may have occurred
with the photo frame. To recover from the
error, tum the power of the photo frame
off and then back on.
.. Even if the input of the TV is not set to the
photo frame, images may sometimes not
be displayed on the TV screen or LCD
screen if an HDMI cable is connected.
.. Change the input of the TV to the photo
frame, or disconnect the HDMI cable and
switch the display to the LCD screen.
Nothing happens
even if you operate
the photo frame.
.. Push reset switch on rear side of the photo
frame by thin object such as a pin, etc.