Table of Contents
Advertisement
Chapter One – Introduction
1.1 Performance Characteristics
0～255 individually addressed units. The dome address is defined using a dip switch with 8 positions (Binary
addressing scheme).
Integrated multi-protocol and auto protocol differentiation. Note: The dome can auto differentiate the protocol of
the Controller only on power Up.
Continuous Pan 360 degree rotation.
90 degree Tilt action plus 2 degree angle adjustment (the view angle can be 90 or 92 degrees).
Pan speed in manual operation is variable from 0.1 Up to 300 degrees per second.
Tilt speed in manual operation is variable from 0.1 to 120 degrees per second.
128 preset positions. (A preset position is defined as a user definable setting for precise coordinates).
The maximum speed when a preset position is called can reach 400 degrees per second with positioning accuracy of±
0.1 degree.
Input power Supply: 24VAC-2Amp (outdoor).
User friendly on screen menu interface for ease of installation.
Environmental protection conforming to IP66 standards (outdoor model).
RS-485 (long distance) communications mode.
Selectable transmission speed, (i.e. Baud rate). User definable via dip switch setting from 2400bps to 1920 bps.
1.2 Features and Functions
Multi-language on screen menu for operation and function settings.（The camera title is user definable as well as the
ability to display or not the camera coordinates）.
On screen Crosshair function (By enabling this option, the target can be followed more effectively using the crosshairs
as a reference point).
Three user definable PTZ tours with Up to 2 minutes record duration for each tour. (User has the ability in real-time to
monitor and record the action of a manual dome operation).
Six group of programmable vector scans (including scan speed, dwell time, preset and dwell time between tours) Auto
flip function in tilt action + 10 degree positioning.
24 sectors of user programmable privacy zones (sectional mask) .User can mask part of the camera sectors which
differs between different models of installed cameras.
Eight sectors of user programmable sectional display. User can define and display the name and position of the camera,
which differs between different models of installed cameras.
Resume automatic operation after initial self-test of the dome as well as resume automatic operation when there is no
transmission from a keyboard controller (Dwell time can be set from 1 to 999 seconds).
Freeze frame function (Snapshot function availability Supported by camera).
Resume operation function (Dome unit will return to the previous operation after the execution of an operation using
the on screen menu).
Intelligent manual scan function (By executing this function in manual pan, you can adjust the manual pan behavior of
the dome).
1
Advertisement
Table of Contents
