IBM -3455 Installation And Operating Manual page 9

LOCATION OF CONTROLS AND FEATURES
Talk P
The P key is used to access the telephone line.
Delete Key R
The R key is used to erase digits on the display, single or multiple entries from the
speed dial and Caller ID directories.
Caller ID Key H
The H key is used to review Caller ID information stored in memory.
Hold Key D/MENU
The D/MENU key is used to place a call on hold. This key is also used to access the
programmable functions of your phone.
L M
Up/Down Keys
L M
The keys let you scroll through menu options and adjust the ringer and
handset volume.
Dial Pad
Numeric keys are used in the conventional manner for dialing.
Flash Key G
The G key is used to access telephone company services, like call waiting.
Redial Key F/PAUSE
The telephone will automatically redial the last number dialed. F/PAUSE is also used
to program a measured pause into a dialing sequence stored into a memory location.
Memory Key E
Use E to program and retrieve the numbers in the speed dial directory.
Channel Change Key I
The I key, when pressed, will scan up to 50 channels and select the clearest one to
provide the best possible reception.
Temporary Tone Key *
If the base is set to pulse dialing, pressing * causes subsequent digits to be dialed out
using tone until the line is put back on hook.
Ringer Switch
The RINGER switch is used to turn the handset ringer ON and OFF.
Headset Jack
Allows using a headset for hands-free convenience.
8