Pro-Form Ultimate LX DTL44941 User Manual page 8

4. Hold the Console Base (47) near the Left Handrail (71).
Attach the end of the ground wire on the Console Base
to the indicated small hole in the Left Handrail with the
1/2" Ground Screw (75).
5. Set the Console Base (47) on the Right Handrail (72) and
the Left Handrail (71). Attach the Console Base with four
3/4" Screws (2). Start all four Screws before tightening
them; do not overtighten the Screws.
6. Touch the Right Handrail (72) to discharge any static.
Press the end of the Upright Wire (42) into the socket in the
bottom of the Console Base (47). The connector should
slide easily into the socket and snap into place. If the
connector does not slide easily and snap into place, turn
the connector and then insert it.
4
Small
Hole
71
5
72
2
6
72
8
Ground
Wire
47
75
47
42
47
71
2