Epson EH-TW9200W User Manual page 68

Configuration Menu
Function
Advanced Gamma
RGB
RGBCMY
EPSON Super White
Color Gam‐
*6
ut
Power Con‐ Normal, ECO
sumption
Auto Iris Off, Normal, High Speed
Reset Yes, No
*1 This may not be displayed depending on the model you are using.
*2 This is not displayed when a computer image signal is being input.
*3 When Color Mode is set to Natural, THX, or 3D THX, the settings change to 5000K - 10000K.
*4
Only EH-TW9200W/EH-TW9200/EH-TW8200W/EH-TW8200 is displayed.
*5 Settings are saved for each type of input source or Color Mode.
*6 Only EH-TW9200W/EH-TW9200 is displayed.
*7
When Color Mode is set to THX, the settings change to Extra Bright and Normal.
Menu/Settings
2, 1, 0, -1, -2
*4
Customized Adjust it from the im‐
age, Adjust it from the
graph
Reset
Offset R/G/B
Gain R/G/B
R/G/B/C/M/Y Hue, Satura‐
tion, Bright‐
ness
*5
On, Off
HDTV, EBU, SMPTE-C
*7
67
Explanation
Performs gamma adjustments. You can
select a raw value or adjust the gamma
while looking at the image or graph.
p.34
s
Adjusts the offset and gain for each R, G,
and B color. p.35
s
Adjusts the hue, saturation, and bright‐
ness for each R, G, B, C, M, and Y color.
p.33
s
(This can only be set when the Color
Mode is set to Natural, THX, Cinema, 3D
Cinema, or 3D THXand when receiving
signal input from the HDMI1 or HDMI2
ports, or from WirelessHD.)
Set this to On if you are experiencing
bright over exposure of whites in your im‐
age. When set to On, HDMI Video Range
settings are disabled.
Sets the color gamut to match the stand‐
ard for the video device being used.
p.41
s
You can set the lamp brightness to one of
two settings.
Select ECO if the images being projected
are too bright. When ECO is selected, pow‐
er consumption during projection decrea‐
ses, and fan rotation noise is reduced.
You can change the luminance adjust‐
ment tracking for changes in brightness in
the displayed image. Set to Off for no lu‐
minance adjustment.
s
You can reset all adjustment values for
Image to their default settings.
p.38