M4 Bluetooth Proper Fitment and Care of Earplug Speakers Proper Fitment of Neckmike Microphone User Guide M4 Bluetooth Unit Overview M4 Bluetooth Unit Functions and Operation Basic Operation Bluetooth Pairing Pairing with a Mobile Phone Using with a Mobile Phone...
--Proper fitment is essential to achieve good results-- Connect the Neckmike via the coiled extension cable to the M4 Bluetooth unit, with the right-angled end plugged into the Save this manual for future reference. Bluetooth unit and the straight connector plugged into the headset.
Pressing the reset button does not erase Bluetooth enabling you to hear the relevant audio (intercom, music, etc.) pairings made with mobile phones or other M4 units. enabled by Neckmike. Neckmike comes with multiple sizes of earplugs, to fit different Neckmike Components diameter and depth of ear canals.
Page 4
If you wear a helmet with Neckmike, you should also shorten the earplugs on the end which affixes to the micro-speakers, so that the Install the earplugs by reaching over head with the opposite hand...
Proper Fitment of the Neckmike Microphone NOTICE Neckmike is designed for all-day comfort and the neck band is Earplugs should be removed from the micro-speakers prior to flexible to accommodate different neck sizes. The microphone cleaning and should be completely dry prior to reattaching to the cabinet should have full contact against the skin for the best micro-speakers.
The M4 unit enables one-to-one Bluetooth intercom functionality up to 1,000M between up to four different M4 units (You + 3 others). Note Image 7 the functional range of the intercom feature will be influenced by terrain such as trees and hills, obstacles such as buildings and weather conditions.
Page 7
The M4 unit is easy to operate with several buttons (Image 9A): LED indicator light On / Off (motorcycle icon)- Turns the unit on and off Blue flash every 2-3 seconds when unit is powered Phone / Play (phone icon)- Connects and disconnects phone Steady blue flash every 2-3 seconds when unit is on calls;...
The M4 Bluetooth battery will enable up to 9 hours of talk time and provide audible confirmation. For example, the unit beeps when has a standby life of approximately 120 hours (5 days).
If you are using a Bluetooth mobile phone and GPS, you should first 6. Your mobile phone will confirm that the pairing has pair the mobile phone to the GPS device, and then pair the M4 unit succeeded. The M4 unit LED will now steadily flash blue to the GPS (see further instructions on page 13).
(depending on your phone model). First label each M4 unit A, B, C or D (as applicable). To pair the first two units (A, B), make sure the other M4 units are powered off and...
2-4 again. Rider-to-Passenger Using the M4 Bluetooth Unit Intercom Opening and closing intercom sessions is as easy as pushing a button. If you are using unit A, and your fellow rider is using unit B, short press the “B”...
To pair unit B to unit C, follow the same process. First, make sure If you are using more than two M4 units, they will be paired in the the other M4 units are powered off and no buttons are pressed on same way as the first two units.
Page 13
If for some reason this process is not successful the first time, press the reset button on each unit and perform steps 2-4 again. An unadvertised feature of the M4 is the ability to pair a fourth unit to the On / Off button (with a motorcycle icon). This is not advertised, Because there is no unit “D”...
Note that GPS units with built-in music functions (ex. Garmin zumo pair the GPS to the M4 unit as a headset. This will allow you to hear 660, 665, 550) become the audio source when paired to the M4, and navigation voice prompts with the Neckmike headset, while using the GPS screen to accept or reject phone calls.
PIN or password, enter 0000 (four zeros). Your MP3 player should confirm that the pairing has succeeded. Once the helmet clip is in place, the M4 unit attaches to the bracket The M4 and the MP3 device should automatically connect each time by inserting lining up the mounting tabs on the back of the M4 unit they are powered on and within range (~10 m).
To use the M4 Bluetooth unit without a helmet, an accessory arm Note there is a 1-5 second delay after a selected button is pushed band is available to attach the M4 unit to the user’s arm. Go to before activation, depending on the function. Once a button is www.neckmike.us...
reception, which can be determined by turning the equipment off and Do not leave the M4 unit exposed to a heat source or in a on, the user is encouraged to try to correct the interference by one of high temperature location.
All rights reserved. The content of this User Guide may not be Use care when installing the Product so that the Product is secure. copied, in whole or in part, without the written consent of Neckmike USA and is protected by copyright laws.
Limited Warranty Neckmike USA retains the exclusive right to repair or replace (with a new or remanufactured replacement product) the device or offer a full refund of the purchase price at its sole discretion. SUCH This Neckmike product is warranted to be free from defects in REMEDY SHALL BE YOUR SOLE AND EXCLUSIVE REMEDY materials or workmanship for one year from the date of purchase.
Page 20
Neckmike USA 18460 S. Ridgeview Road Olathe, KS 66062 www.neckmike.us M4 Bluetooth User Guide v1.4 Page 20...