1. Manuals
  2. Brands
  3. Whirlpool Manuals
  4. Washer
  5. AWM 5100
  6. Instructions for use manual

Whirlpool AWM 5100 Instructions For Use Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Instructions for use

AWM 5100
Whirlpool Switzerland, www.whirlpool.ch
Bauknecht AG, Industriestrasse 36, 5600 Lenzburg, www.bauknecht.ch
Verkauf
Telefon 0848 801 002
Kundendienst
Telefon 0848 801 001
Ersatzteile
Telefon 0848 801 005
Fax 0848 801 017
Fax 0848 801 003
Fax 0848 801 004
verkauf@bauknecht.ch
service@bauknecht.ch
ersatzteilverkauf@bauknecht.ch

Advertisement

Table of Contents
loading

Related Manuals for Whirlpool AWM 5100

Summary of Contents for Whirlpool AWM 5100

  • Page 1: Instructions For Use

    Instructions for use AWM 5100 Whirlpool Switzerland, www.whirlpool.ch Bauknecht AG, Industriestrasse 36, 5600 Lenzburg, www.bauknecht.ch Verkauf Telefon 0848 801 002 Fax 0848 801 017 verkauf@bauknecht.ch Kundendienst Telefon 0848 801 001 Fax 0848 801 003 service@bauknecht.ch Ersatzteile Telefon 0848 801 005 Fax 0848 801 004 ersatzteilverkauf@bauknecht.ch...

  • Page 3: Table Of Contents

    CONTENTS BEFORE USING THE WASHING MACHINE FIRST WASH CYCLE PRECAUTIONS AND GENERAL RECOMMENDATIONS DESCRIPTION OF THE WASHING MACHINE CHILD SAFETY PREPARATION OF THE WASHING DETERGENTS AND ADDITIVES WASHING PROGRAMME REMOVING THE FILTER DRAINING RESIDUAL WATER CARE AND MAINTENANCE TROUBLESHOOTING GUIDE AFTER-SALES SERVICE TRANSPORT AND HANDLING INSTALLATION...

  • Page 4: Before Using The Washing Machine

    BEFORE USING THE WASHING MACHINE 1.Removing the packaging and check 6.Electrical connections • Electrical connections must be carried out by a • After unpacking, make sure that the washing qualified technician in compliance with the machine is undamaged. If in doubt, do not use manufacturer’s instructions and current standard the washing machine.

  • Page 5: First Wash Cycle

    FIRST WASH CYCLE We recommend the first wash cycle be made without laundry. This will remove any residual water used in testing your washing machine. 1.Turn on the tap. 2.Close the appliance door. 3.Pour a small amount of detergent (about 30 ml) into the detergent dispenser 4.Select a short program (see programme chart).

  • Page 6: Description Of The Washing Machine

    DESCRIPTION OF THE WASHING MACHINE 1. Worktop 2. Control panel 3. Detergent dispenser 4. After-Sales Service sticker (on the back side of the door) 5. Door 6. Door handle • To open the door press the button on the inside of the handle and pull •...

  • Page 7: Preparation Of The Washing

    PREPARATION OF THE WASHING Sort the laundry Stain removal 1. Sort the laundry according to… • Blood, milk, egg and other organic substances are generally removed by the enzyme phase of • Type of fabric / care label symbol the programme. Cottons, mixed fibres, easy care/synthetics, wool, handwashed items.
  • Page 8 Dosage Insufficient detergent may result in: grey laundry, deposits on the drum, tub and heater. Follow the instructions on the detergent pack in relation to: You can use liquid detergent in the “Prewash” • the degree and type of soiling; phase for programmes with this option.

  • Page 9: Washing Programme

    WASHING PROGRAMME Selecting the programme: 1.Plug in the appliance. 2.Turn on the water supply tap. 3.Set the Programme Selector knob to the desired programme. 4.Depending on model, set the Temperature Selector knob to the desired temperature. 5.Depending on model, set the Spin Speed Selector knob to the desired spin speed. 6.Select additional options, if desired, pressing the corresponding button.
  • Page 10 Start delay (depending on model) 1.Select the programme and temperature, any additional options and the spin speed. 2.Press the “On/Off” button. The display flashes “0” for 6 seconds. 3.During these 6 seconds press the “Start Delay” button and select delay time: 0,3,6,9 hours. 4.The programme will start at the desired time, or after 6 seconds if “0”...

  • Page 11: Removing The Filter

    REMOVING THE FILTER 1. Switch off the appliance and unplug it. 2. Remove the coloured insert from the detergent dispenser and use it to open the filter cover. 3. Place a bowl beneath the filter. 4. Turn the filter slowly anti-clockwise until the grip is vertical;...

  • Page 12: Care And Maintenance

    CARE AND MAINTENANCE Appliance exterior and control panel Door seal • Clean using normal household cleaner (do not • Clean with a damp cloth when necessary. use abrasive products and no solvents). • Periodically check the fold of the seal for foreign •...
  • Page 13 Water hose mesh filter Check and clean periodically. For machines with a straight water supply hose “A” 1.Turn off the tap. 2.Unscrew the hose from the tap. 3.Clean the internal filter. 4.Screw the supply hose back onto the tap. 5.Unscrew the hose from the machine. 6.

  • Page 14: Troubleshooting Guide

    TROUBLESHOOTING GUIDE The appliance will not start, no lamp lights up. The appliance vibrates during the spin cycle. Check whether: • the appliance is plugged in; Check whether: • the wall socket is functioning correctly • the appliance is levelled and solidly installed on (use a table lamp or similar).

  • Page 15: After-Sales Service

    AFTER-SALES SERVICE Before contacting After-Sales Service: Specify: 1. Try to remedy the problem yourself (see • The nature of the problem. “Troubleshooting Guide”). • The exact model of the appliance. 2. Restart the programme to check whether the • The service code (number after the word problem has solved itself.

  • Page 16: Installation

    INSTALLATION Remove the transit bolts 1.Slacken the four bolts with the spanner supplied. 2.Unscrew the bolts by hand. 3.Holding the bolt head, pull each bolt through the wide part of the holes. 4.Close the holes with the plastic covers supplied; insert the covers in the wide part of the hole and slide them toward the narrow part until they click into place.
  • Page 17 Worktop for built-under models The appliance must only be installed beneath a continuous fitted kitchen worktop. If the appliance will be built under it is mandatory to use the cover panel UBS. This can be obtained from specialist shops or from After-Sales Service. 1.Unplug the appliance.
  • Page 18 Connect the water drain hose The draining varies according to model: External drain hose 1a.Unhook the drain hose from the left clip. Attention: do not unhook the right drain hose connection. Internal drain hose 1b.Pull the hose completely out of the holder. Close off the hole with the attached cap.

  • Page 19: Electrical Connection

    ELECTRICAL CONNECTION Do not use extension leads or multi sockets. Electrical connections must be made in accordance with local regulations. 1) Warning - this appliance must be earthed This appliance is normally supplied with a mains lead having a plug fitted in the factory which has been checked for correct earth continuity.

Table of Contents