Carrier 30AWH004HB Service Manual page 107

N° Exchange Work procedure (IMPORTANT: Ensure gloves are
parts worn at all times to avoid risk of injury)
name
(11) Pulse
modula- 1. Perform the works from 1 to 4 of (1) and (3).
ting 2. Hold outside of the coil by hands and turn it while
valve lifting upward.
(PMV)
coil then the coil can be removed from PMV body.
4. Match the positioning extrusion of the coil surely to
the concave part of PMV body, and then fix it.
(12) Fan guard Detachment
1. Perform works from 1 to 4 of (1) and (3).
2. Remove the front cabinet, and put it down so that
fan guard side directs downward.
Caution: Perform works on a corrugated cardboard,
cloth, etc. to prevent flaw on the product.
3. Remove the screws fixing the bell-mouth (ST8P Ø8.2
4. Remove the bell-mouth.
5. Remove the screws fixing the fan guard (ST8P Ø8.2
6. Remove hanging hook of the fan guard by pushing
with a minus screwdriver.
7. Fix the hanging hooks by pushing with hands.
REQUIREMENT
SM_30AW.indd 107
Remarks
PMV Coil
Bell-mouth h
Screw w
Hanging Hooks
Screw w
107
8
Maintenance
30AW
14-03-2011 14:46:38