Tire Information - Ford 2014 Focus ST Supplement Manual

2014 ford focus st
Hide thumbs Also See for 2014 Focus ST:
Table of Contents

Advertisement

Retighten the lug nuts to the specified torque at 500 miles
(800 kilometers) after any wheel disturbance (for example, tire rotation,
changing a flat tire, wheel removal).
Bolt size
M12 x 1.5 mm
* Torque specifications are for nut and bolt threads free of dirt and
rust. Use only Ford recommended replacement fasteners.

TIRE INFORMATION

Tires
Size
Speed rating
Load rating
Usage
Wheels
Your ST vehicle is equipped with low profile, high performance tires that
are designed to optimize the driving dynamics you expect in a ST
vehicle. These tires are not optimized for off-road or winter (snow or
cold weather) performance, and their ride, noise and wear characteristics
are different than non-performance tires. Also, because of their lower
profile, the tires are more susceptible to damage due to potholes and
rough roads. To make sure that your tires perform as intended, it is
important that you maintain your tires properly:
• Note: Do not use tire chains on the original wheels and tires of your
vehicle. The use of any type of tire chain on these tires may damage
your vehicle.
• Do not overload your vehicle. Maximum vehicle and axle weights are
listed on the tire information placard.
• Extra caution should be taken when operating the vehicle near its
maximum load, including assuring proper tire pressure and reducing
speeds.
• Extra caution should be taken when operating on rough roads to avoid
impacts that could cause tire damage.
• In the event that you encounter an abnormally harsh impact, inspect
your tires for damage.
2014 Focus ST (stf)
Supplement, 1st Printing, June 2013
USA (fus)
Wheels and Tires
Wheel lug nut torque*
ft-lb
100
Goodyear Eagle F1
235/40-18
Y
95
Summer only
18 in. x 8.0 in., 55 mm offset aluminum wheels
N•m
135
15

Advertisement

Table of Contents
loading

Table of Contents