Table of Contents
Advertisement
Main Source
PBP Source
Resolution A
640x350-70Hz
720x400-70Hz
Resolution A
3840x2160-30Hz
640x350-70Hz
3840x2160-60Hz
720x400-70Hz
3840x2160-30Hz
3840x2160-60Hz
3840x2160-30Hz
3840x2160-30Hz
3840x2160-60Hz
3840x2160-60Hz
3840x2160-30Hz
3840x2160-60Hz
• To get better view experience, to keep DisplayPort as main source is
recommended.
• Resolution A refers to the resolution which is equal or less than
1920x1080 and H frequency is equal or less than 60Hz.
ASUS LCD Monitor PB287 Series
PBP mode main/sub source setting
Support
Resolution A
640x350-70Hz
YES
720x400-70Hz
NO
Resolution A
640x350-70Hz
NO
720x400-70Hz
NO
No signal
NO
Operating Instruction
If main source (left window) is HDMI-1, sub
source is DisplayPort( right window):
1. Activating the OSD, turn off the PBP function
2. Select the input source to DisplayPort
3. Change the PC DisplayPort resolution to
1920x1080-60Hz
4. Activating the OSD,turn on the PBP function,
and select the main/sub source you wanted.
If main source(left window) is DisplayPort, sub
source is HDMI-1(right window):
1. Activating the OSD, select the main source
to HDMI-1
2. turn off the PBP function
3. Select the input source to DisplayPort
4. Change the PC DisplayPort resolution to
1920x1080-60Hz
5. Activating the OSD, turn on the PBP function,
and select the main/sub source you wanted.
If main source(left window) is DisplayPort, sub
source is HDMI-1(right window):
1. Activating the PIP/PBP Setting shortcut OSD,
turn off the PBP function
2. Change the PC DisplayPort resolution to
1920x1080-60Hz
3. Activating the OSD, select the main source
to HDMI-1
4. Change the PC HDMI-1 resolution to
1920x1080-60Hz
5. Activating the OSD, turn on the PBP function,
and select the main/sub source you wanted.
If main source (left window) is DisplayPort, sub
source is HDMI-1 or HDMI-2 (right window):
1. Activating the OSD, select the main source to
HDMI-1 or HDMI-2
2. Activating the PIP/PBP Setting shortcut OSD,
turn off the PBP function
3. Select the input source to DisplayPort
4. Change the PC DisplayPort resolution to
1920x1080-60Hz
5. Activating the OSD, turn on the PBP function,
and select the main/sub source you wanted.
3-7
Hide quick links:
Advertisement
Table of Contents
