TABLE OF CONTENT SAFETY ............................4 National Conventions ........................4 Power ..............................5 Installation ............................6 Cleaning ............................7 Other..............................8 SETUP ............................9 Contents of the Box ........................9 Adjusting Viewing Angle .........................9 Connecting the Monitor ......................10 Multi-Touch Screen ........................11 Connecting usb keyboard & mouse ..................12 Setting up the USB keyboard ....................
Page 3
Monitor Driver ..........................31 Windows 8 ..........................31 Windows 7 ..........................36 Windows Vista ........................40 Windows 2000 ........................42 Windows ME .......................... 42 i-Menu ............................43 e-Saver ............................44 Screen+ ............................45 TECHNICAL SUPPORT (FAQ) ..................46 Troubleshoot ..........................46 Error Message &...
SAFETY NATIONAL CONVENTIONS The following subsections describe notational conventions used in this document. Notes, Cautions, and Warnings Throughout this guide, blocks of text may be accompanied by an icon and printed in bold type or in italic type. These blocks are notes, cautions, and warnings, and they are used as follows: NOTE: A NOTE indicates important information that helps you make better use of your monitor..
POWER The monitor should be operated only from the type of power source indicated on the label. If you are not sure of the type of power supplied to your home, consult your dealer or local power company. The monitor is equipped with a three-pronged grounded plug, a plug with a third (grounding) pin.
INSTALLATION Do not place the monitor on an unstable cart, stand, tripod, bracket, or table. If the monitor falls, it can injure a person and cause serious damage to this product. Use only a cart, stand, tripod, bracket, or table recommended by the manufacturer or sold with this product.
CLEANING Clean the cabinet regularly with cloth. You can use soft-detergent to wipe out the stain, instead of strong-detergent which will cauterize the product cabinet. When cleaning, make sure no detergent is leaked into the product. The cleaning cloth should not be too rough as it will scratch the screen surface. Please disconnect the power cord before cleaning the product.
OTHER If the product is emitting a strange smell, sound or smoke, disconnect the power plug IMMEDIATELY and contact a Service Center. Make sure that the ventilating openings are not blocked by a table or curtain. Do not engage the LCD monitor in severe vibration or high impact conditions during operation.
10. USB Mouse • Not all signal cables (D-SUB, Audio, USB , HDMI cables) and Keyboard , Mouse will be provided for all countries and regions. Please check with the local dealer or AOC branch office for confirmation. ADJUSTING VIEWING ANGLE • For optimal viewing, it is recommended to look at the full face of the monitor, and then adjust...
CONNECTING THE MONITOR Cable connections at the back of monitor: Power Input USB Port SD Card Slot (SD/SDHC/SDXC/ USB Port (Micro USB) MMC/MS/MS-Pro) D-SUB Signal Input USB Port HDMI Signal Input Audio In RJ45 (10/100Mbps) Earphone Out USB Port Kensington Lock To protect equipment, always turn off the PC and monitor before connecting.
MULTI-TOUCH SCREEN User can use Display Multi-touch(2 points) Function under Android system. While you under XP, win7, win8 system, before using Display Multi-touch(2 points) Function, user need to connect basic wires ( power cable, VGA cable, USB cable). Then user can fully enjoy Multi-touch (2 points) Function.
CONNECTING USB KEYBOARD & MOUSE To use this monitor for Android system, you need to connect USB keyboard/mouse to the USB port at the back of monitor: To use this monitor as a normal monitor for D-SUB and HDMI input controlled by the same USB keyboard/mouse connected to the USB port at the back of monitor, you need to connect a B-type USB cable from this monitor to your PC.
5. Click Display Settings. 6. Set the resolution SLIDE-BAR to 1920 x 1080. Windows 8 1. Right click and click All apps at the bottom-right of the screen. 2. Set the “View by” to “Category”.
3. Click Appearance and Personalization. 4. Click DISPLAY. 5. Set the resolution SLIDE-BAR to 1920 x 1080. Windows ME/2000 1. Click START. 2. Click SETTINGS. 3. Click CONTROL PANEL. 4. Double click DISPLAY. 5. Click SETTINGS. 6. Set the resolution SLIDE-BAR to 1920 x 1080.
OPERATING INSTRUCTIONS HOTKEYS • Connect the power cord and the video cable. • Press the POWER key to turn on the monitor. The power indicator will light up. For menu control – POWER / CLEAR VISION MENU / ENTER SOURCE / AUTO / EXIT / VOLUME • Do not install the monitor in a location near heat sources such as radiators or air ducts, or in a place subject to direct sunlight, or excessive dust or mechanical vibration or shock.
OSD SETTING Basic and simple instruction on the control keys. Luminance Image Setup Color Setup Picture Boost OSD Setup Extra Exit Contrast Gamma Gamma 1 Brightness Eco mode Standard Overdrive 1. Press button to display the control menu. 2. Press button to navigate through the menu items.
Luminance Luminance Image Setup Color Setup Picture Boost OSD Setup Extra Exit Contrast Gamma Gamma 1 Brightness Overdrive Eco mode Standard 1. Press button to display menu. 2. Press button to select (Luminance), and press button to enter. 3. Press button to select submenu, and press button to enter.
Image Setup Image Setup Color Setup Picture Boost OSD Setup Extra Exit Luminance Clock H. Position Phase V. Position Sharpness 1. Press button to display menu. 2. Press button to select (Image Setup), and press button to enter. 3. Press button to select submenu, and press button to enter.
Color Setup Color Setup Picture Boost OSD Setup Extra Exit Luminance Image Setup Color Temp. Warm DCB Mode Green DCB Demo Blue 1. Press button to display menu. 2. Press button to select (Color Setup), and press button to enter. 3.
Picture Boost Picture Boost OSD Setup Extra Exit Luminance Image Setup Color Setup Bright Frame Brightness H. Position Frame Size Contrast V. Position 1. Press button to display menu. 2. Press button to select (Picture Boost), and press button to enter. 3.
OSD Setup OSD Setup Extra Exit Luminance Image Setup Color Setup Picture Boost Language English H. Position Transparence Timeout V. Position Break Reminder S.Power On Sync 1. Press button to display menu. 2. Press button to select (OSD Setup), and press button to enter.
Extra Extra Exit Luminance Image Setup Color Setup Picture Boost OSD Setup Input Select Auto Image Ratio 4 : 3 Resolution : 1024(H)X768(V) Auto Config. DDC/CI H. Frequency : 60KHz Off Timer Reset V. Frequency : 60Hz 1. Press button to display menu. 2.
Exit Exit Luminance Image Setup Color Setup Picture Boost OSD Setup Extra 1. Press button to display menu. 2. Press button to select (Exit), and press button to enter. Main Menu Sub Menu Item Description Exit Exit Exit the main OSD. LED INDICATOR Status LED Color...
STARTING WITH ANDROID This Smart Monitor is embedded with Android operating system, that it can work individually without connecting a PC. 1. Press button to display the source list. 2. Select [Android] and press button to confirm the selection. 3. Press button to display the selections.
CUSTOMIZING YOUR HOME SCREEN Adding application icons, shortcuts, or widgets to the home screen as your preference. You can also change the wallpaper. • Add an item to the Home Screen: 1. Click on the icon to view the application gallery. 2.
USING THE ON-SCREEN KEYBOARD • Enter text: 1. Click on a text field. The on-screen keyboard opens. 2. Click on the keys to type. Description Description Press to enter expression symbol. Switch to upper or lower case Long press to select from all letters for English input.
ADJUSTING THE SETTINGS FOR ANDROID Click on the at the bottom-right of the screen. Click on the [Settings] to open the sub-menu. Main Menu Sub Menu Item Description NETWORKS Turn on or off the Wi-Fi. Manage the Wi-Fi network. Wireless & networks Search and connect to the available networks.
Page 29
Main Menu Sub Menu Item Description SYSTEM Check for using the information form the network Automatic data & time automatically. Unchecked for entering the information manually. Set date Set the date. Date & time Set time Set the time. Select time zone Select the time zone for current region.
ANDROID SOFTWARE UPDATE You can upgrade system by Online update mode or Local update mode. • Online update support upgrade from SD card. Local update support upgrade from SD card device. • During system update, DONOT pull out SD card device or power off Smart Monitor Local update 1.
DRIVER MONITOR DRIVER Windows 8 ® 1. Start Windows 2. Right click and click All apps at the bottom-right of the screen. 3. Click on the “Control panel” icon...
Page 32
4. Set the “View by” to “Large icons” or “Small icons”. 5. Click on the “Display” icon.
Page 33
6. Click on the “Change display settings” button. 7. Click the “Advanced Settings” button.
Page 34
8. Click the “Monitor” tab and then click the “Properties” button. 9. Click the “Driver” tab.
Page 35
10. Open the “Update Driver Software-Generic PnP Monitor” window by clicking on “Update Driver... “ and then click the “Browse my computer for driver software” button. 11. Select “Let me pick from a list of device drivers on my computer”.
12. Click the “Have Disk” button. Click on the “Browse” button and navigate to the following directory: X:\Driver\module name (where X is the drive letter designator for the CD-ROM drive). 13. Select the “xxx.inf” file and click the “Open” button. Click the “OK” button. 14.
Page 37
3. Click on the “Display” icon. 4. Click on the “Change display settings” button. 5. Click the“Advanced settings”button.
Page 38
6. Click the “Monitor” tab and then click the “Properties” button. 7. Click the “Driver” tab. 8. Open the “Update Driver Software-Generic PnP Monitor” window by clicking on “Update Driver... “ and then click the “Browse my computer for driver software” button.
Page 39
9. Select “Let me pick from a list of device drivers on my computer”. 10. Click the “Have Disk” button. Click on the “Browse” button and navigate to the following directory: X:\Driver\module name (where X is the drive letter designator for the CD-ROM drive). 11.
Windows Vista 1. Click “Start” and “Control Panel”. Then, double-click on “Appearance and Personalization”. 2. Click “Personalization” and then “Display Settings”. 3. Click “Advanced Settings...”.
Page 41
4. Click “Properties” in the “Monitor” tab. If the “Properties” button is deactivated, it means the configuration for your monitor is completed. The monitor can be used as is. If the message “Windows needs...” is displayed, as shown in the figure below, click “Continue”. 5.
8. Select your monitor model and click on the “Next” button. 9. Click “Close” “Close” “OK” “OK” on the following screens displayed in sequence. Windows 2000 ® 1. Start Windows 2000. 2. Click on the “Start” button, point to “Settings”, and then click on “Control Panel”. 3.
I-MENU Welcome to “i-Menu” software by AOC. i-Menu makes it easy to adjust your monitor display setting by using on screen menus instead of the OSD button on the monitor. To complete installation, please follow the installation guide.
E-SAVER Welcome to use AOC e-Saver monitor power management software! The AOC e-Saver features Smart Shutdown functions for your monitors, allows your monitor to timely shutdown when PC unit is at any status (On, Off, Sleep or Screen Saver); the actual shutdown time depends on your preferences (see example below).
SCREEN Welcome to “Screen+” software by AOC. Screen+ software is a desktop screen splitting tool; it splits the desktop into different panels, and each panel displays a different window. You only need to drag the window to a corresponding panel when you want to access it. It supports multiple...
Adjust the maximum resolution and frequency that the monitor can handle properly. • Make sure the AOC Monitor Drivers are installed. • Adjust the Contrast and Brightness Controls. • Press to auto adjust.
Problem & Question Possible Solution Screen image is not centered or sized • Adjust H-Position and V-Position or press hot-key (AUTO). properly Picture has color defects • Adjust RGB color or select desired color temperature. (white does not look white) • Use Windows 95/98/2000/ME shut-down mode to adjust Horizontal or vertical disturbances on CLOCK and PHASE.
APPENDIX PLUG AND PLAY Plug & Play DDC2B Feature This monitor is equipped with VESA DDC2B capabilities according to the VESA DDC STANDARD. It allows the monitor to inform the host system of its identity and, depending on the level of DDC used, communicate additional information about its display capabilities.
Page 49
Windows OS Android OS Keys √ × √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √...
For HDMI Horizontal Vertical Dot Clock Resolution Frequency (kHz) Frequency (Hz) (MHz) 480P@60Hz for Digital only 31.469 59.940 25.175 480P@60Hz for Digital only 31.469 59.940 27.000 576P@50Hz for Digital only 31.250 50.000 27.000 720P@50Hz for Digital only 37.500 50.000 74.250 720P@60Hz for Digital only 45.000 60.000...
REGULATION EUROPE EU Declaration of Conformity This device complies with the essential requirements of the R&TTE Directive 1999/5/EC. The following test methods have been applied in order to prove presumption of conformity with the essential requirements of the R&TTE Directive 1999/5/EC: −...
TAIWAN 低功率電波輻射性電機管理辦法: 第十二條 經 型式認證合格之低功率射頻電機,非經許可,公司、商號或使用者均不得擅自 變更頻率、加大功率或變更原設計之特性及功能。 第十四條 功 率射頻電機之使用不得影響飛航安全及干擾合法通信;經發現有干擾現象時, 應立即停用,並改善至無干擾時方得繼續使用。 前項合法通信,指依電信法規定作業之無線電通信。 低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干 擾。 在 5.25-5.35 秭赫頻帶內操作之無線資訊傳輸設備,限於室內使用。 Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
CANADA Industry Canada statement: This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Ce dispositif est conforme à...
MEXICO Cofetel notice is: (Mexico COFETEL aviso:) “La operación de este equipo está sujeta a las siguientes dos condiciones: (1) es posible que este equipo o dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operación no deseada.” BRAZIL ANATEL RF STATEMENT Per Article 6 of Resolution 506, equipment of restricted radiation must carry the following...
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna.
WEEE DECLARATION FOR INDIA This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste. Instead it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment.
AOC Certified or Authorized Service Center under the following condition: • Make sure the LCD Monitor is packed in a proper carton box (AOC prefers the original carton box to protects your monitor well enough during transport).
Page 61
WARRANTY, STRICT LIABILITY, OR OTHER THEORY, SHALL NOT EXCEED THE PRICE OF THE INDIVIDUAL UNIT WHOSE DEFECT OR DAMAGE IS THE BASIS OF THE CLAIM. IN NO EVENT SHALL AOC INTERNATIONAL (EUROPE) B.V. BE LIABLE FOR ANY LOSS OF PROFITS, LOSS OF USE OR FACILITIES OR EQUIPMENT, OR OTHER INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGE.
WARRANTY STATEMENT FOR NORTH & SOUTH AMERICA (EXCLUDING BRAZIL) WARRANTY STATEMENT for AOC Color Monitors Including those Sold within North America as Specified Envision Peripherals, Inc. warrants this product to be free from defects in material and workmanship for a period of three (3) years for parts & labor and one (1) year for CRT Tube or LCD Panel after the original date of consumer purchase.
Page 63
Outside the United States of America, this limited warranty is only valid for Products purchased in Canada. Information in this document is subject to change without notice. For more details, please visit: • USA: http://us.aoc.com/support/find_service_center • ARGENTINA: http://ar.aoc.com/support/find_service_center • BOLIVIA: http://bo.aoc.com/support/find_service_center • CHILE:...
AOC’s service center. If you do not wish to supply a credit card, AOC will only ship the new monitor, once the defective unit arrives at the AOC service center.