Pioneer Super Tuner IIID DEH-P5000UB Operation Manual page 38

Section
D (
Available accessories
Disconnecting a cellular phone
1 Use MULTI-CONTROL to select
DISCONNEa PHONE in the function menu.
Device name of the connected phone appears
in the display.
2 Press MULTI-CONTROL to disconnect a
cellular phone from this unit.
After disconnection is completed,
DISCONNEaED
is displayed.
Registering a connected
cellular phone
1 Use MULTI-CONTROL to select
SET PHONE in the function menu.
2 Press MULTI-CONTROL to display the
setting mode.
3 Turn MULTI-CONTROL to select a regis-
tration assignment.
P1
(user phone 1
)-P2
(user phone
2)-P3
(user phone
3)-G1
(guest phone
1)-G2
(guest phone 2)
• You can also perform the same operations by
pushing MULTI-CONTROL up or down.
• As you select each assignment, you can see
whether or not a phone is already registered. If
the assignment is empty, NO DATA is displayed.
If the assignment is already taken, the device
name appears. To replace an assignment with a
new phone, first delete the current assignment.
For more detailed instructions, see Deleting a re-
gistered phone on this page.
4 Press MULTI-CONTROL to register the
currently connected phone.
When registration is completed,
REG COMPLETED
is displayed.
• If the registration fails,
REG ERROR
is dis-
played. In this case, return to step 1 and try
again.
®
En
)
Deleting a registered phone
1 Use MULTI-CONTROL to select
DELETE PHONE in the function menu.
2 Press MULTI-CONTROL to display the
setting mode.
3 Turn MULTI-CONTROL to select a regis-
tration assignment.
P1
(user phone 1
)-P2
(user phone
2)-P3
(user phone
3)-G1
(guest phone 1
)-G2
(guest phone 2)
• You can also perform the same operations by
pushing
MULTI-CONTROL
up or down.
• If the assignment is empty, NO DATA is dis-
played and operation is not possible.
4 Press MULTI-CONTROL to show the con-
firmation display.
S Turn MULTI-CONTROL to select
DELETE OK? : YES.
The phone being deleted is now on standby.
• . To cancel, select
DELETE OK?: NO.
6 Press MULTI-CONTROL to delete the
phone.
After the phone is deleted,
DELETED
is dis-
played.
Connecting to a registered
cellular phone
Connecting to a registered phone
manually
1 Use MULTI-CONTROL to select
CONNEa PHONE in the function menu.
2 Press MULTI-CONTROL to display the
setting mode.
3 Turn MULTI-CONTROL to select a regis-
tration assignment.
P1
(user phone 1
)-P2
(user phone
2)-P3
(user phone 3)-G1 (guest phone 1 )-G2
(guest phone 2)