Using Hdmi Input; Connecting Hdmi Equipment - Pioneer PDP-505XDE User Manual

Enjoying through External Equipment

Using HDMI Input

The INPUT 3 terminals include HDMI terminals to which
digital video and audio signals can be input. To use the HDMI
terminal, activate the terminal and specify the types of video
and audio signals to be received from the connected equip-
ment. For the types of these signals, see the operation
manual that came with the connected equipment.
Before starting the menu, press INPUT 3 on the remote
control unit or press INPUT on the Plasma Display to select
INPUT 3.
Input signal correlation table
∗
1920 1080i@50Hz
∗
720 576p@50Hz
∗
1280 720p@50Hz
∗
720(1440) 576i@50Hz
∗
1920 1080i@59.94/60Hz
∗
720 480p@59.94/60Hz
∗
1280 720p@59.94/60Hz
∗
720(1440) 480i@59.94/60Hz
• PC signals are out of correspondence.

Connecting HDMI equipment

Media Receiver (rear view)
ANT
(DIGITAL)
OUT
I N
SERVICE ONLY
CONTROL
OUT
INPUT 1
i / o link.A
SELECT
INPUT
2 3
INPUT 2 INPUT 3
SCART cable
(commercially available.)
Connect the SCART cable only
when inputting analogue audio
signals.
HDMI equipment
To activate the HDMI terminal:
1
Press HOME MENU.
2
Select "Option" ( / then ENTER).
3
Select "HDMI Input" ( /
4
Select "Setting" ( / then ENTER).
5
Select "Enable" ( / then ENTER).
Item Description
Disable Deactivates the HDMI terminal.
(factory default)
Enable Activates the HDMI terminal.
6
Press HOME MENU to exit the menu.
DIGITAL OUT
OPTICAL
IN
COMMON INTERFACE
INPUT 2
SUB WOOFER
OUTPUT COMPONENT VIDEO
Y P P
B R
MONITOR
OUTPUT
HDMI
INPUT 3
VIDEO R-AUDIO-L
S- VIDEO
HDMI cable
(commercially
available.)
then ENTER).
To specify the type of digital video signals:
1
Repeat steps 1 to 3 provided To activate the HDMI
terminal.
2
Select "Video" ( / then ENTER).
3
Select the type of digital video signals ( /
ENTER).
• If you select "Auto", an attempt will be made to
identify the type of digital video signals when digital
video signals are received.
Item Description
Auto Automatically identifies input digital video
(factory default) signals.
Colour-1 Digital Component Video signals (4:2:2)
locked
Colour-2 Digital Component Video signals (4:4:4)
locked
Colour-3 Digital RGB signals locked
4
Press HOME MENU to exit the menu.
• If you select a parameter other than "Auto", make such a
setting that results in natural colour.
• If no image appears, specify another digital video signal
type.
• For the digital video signal types to be specified, check the
operation manual that came with the connected equip-
ment.
To specify the type of audio signals:
1
Repeat steps 1 to 3 provided To activate the HDMI
terminal.
2
Select "Audio" ( / then ENTER).
3
Select the type of audio signals ( /
• If you select "Auto", an attempt will be made to
identify the type of audio signals when audio signals
are received.
Item Description
Auto Automatically identifies input audio
(factory default) signals.
Digital Accepts digital audio signals.
Analogue Accepts analogue audio signals.
4
Press HOME MENU to exit the menu.
• If no sound is output, specify another audio signal type.
• For the audio signal types to be specified, check the
operation manual that came with the connected equip-
ment.
• Depending on the equipment to be connected, you also
need to connect analogue audio cables.
12
then
then ENTER).
45
En