Stb Control - Samsung UN50HU8500 User Manual

5

STB Control

You can control your set-top-box or satellite box with the Samsung Smart Control. To
establish control, you must first set up the IR extender cable. If you don't have an STB,
skip this section.
1
Connect the IR extender cable to the TV's IR output connector.
2
Position the transmitter end within 4 inches (10 cm) of the set-top-box's remote
control sensor, pointing in the direction of the sensor. Make sure there are no
obstacles between the transmitter end of the IR extender cable and the set-
top-box or satellite box. Any obstacles will interfere with the transmission of the
remote control signals.
3
Finalize control of your set-top or satellite box when you run Initial Setup.
IR Out
Connect the
IR Extender Cable here.
Place the transmitter
end within 4 inches
of the set-top-box's
remote control sensor.